Product catalog
Products
6 product(s) in PACKINK Marine
PACKINK Marine
PACKINK Marine is PACKINK’s own marine range for hulls, decks, and structures in salt air and spray. The coatings are meant to hold on prepared steel and to resist wetting, sunlight, and the abrasion of a working vessel.
Use this range when the project is specified as a PACKINK system. Primers, antifouling, and topcoats are combined on purpose: the film underwater is not the product used on a deckhouse.

Putties
Armuz Putty Filler (918-1135) It is a polyurethane based, double-component putty filler. Has an elastic structure. Provides perfect protection against sea water. It has high adhesion and filling power and does not cause volume loss (sedimentation). It is used in caulking processes of wooden boats and in cracks and as a joint filler due to its elasticity. Epoxy Light Filler Rapid Putty (919-3007) It is a solvent-free epoxy resin-based light putty developed for rapid applications. Used to eliminate defects on primed surfaces before the application of topcoats. It has high adhesion and filling power and does not cause volume loss (sedimentation). Provides high resistance against sea water. Has perfect sanding ability. Epoxy Light Putty (919-3005) It is a solvent-free epoxy resin-based light putty. Does not cause much weight to be formed on the boat thanks to its low weight density. It has high adhesion and filling power and does not cause volume loss (sedimentation). Provides high resistance against sea water. Yields very good results in thick coat applications and does not run. Has perfect sanding ability. Used as a filler to eliminate surface defects on proper primers in sheet metal, wooden and fiber boats. Epoxy Putty (919-3001) It is a double-component, solvent-free epoxy resin-based product. It has high adhesion and filling power and does not cause volume loss (sedimentation). Provides high resistance against sea water. Easily sanded. Used as a filler to eliminate surface defects on proper primers in sheet metal, wooden and fiber boats. Polyurethane Putty (918-1130) It is a polyurethane based, double-coated putty used for insulation and adhesive purposes. Provides perfect protection against sea water with its elastic structure. It has high adhesion and filling power and does not cause volume loss (sedimentation). Used on all kinds of wooden, fiber and laminated boats.

Primers
Acrylic Finish Primer (342 Series) It is an acrylic based, double-component topcoat paint primer that dries rapidly and is easily sanded. Used as a filler on the surface before the topcoat and to create a smooth surface for the topcoat paint. Can be applied in two coats with a brush, roller and a spray gun. Can be diluted with PU Acrylic thinners. Suitable for use on all kinds of wooden, fiber and sheet metal boats. Synthetic or polyurethane-based topcoat paints can be applied on 4+1 acrylic primer. Can be sanded after fully dried to apply the topcoat paint. Ferrolin Synthetic Primer (514 AND 517 SERIES) It is an alkyd-based, rapidly drying, anti-rust primer containing anticorrosive pigments. It is used as the first anti-rust primer coat in industrial and marine air conditions when it is desired to protect iron and steel surfaces with synthetic based topcoat paint systems. High Build Epoksi Filler (342 Series) High Build Epoxy Filler (342 Series) It is a double compound epoxy resin-based primer. Resistant to sea water. It is a primer with high filling capacity. Used as the first primer and midcoat primer on wooden and fiber surfaces. It is used as a midcoat primer on Promastic Epoxy on Sheet Metal/Steel surfaces. Promastic Epoxy (348 Series) It is a double-component mastic epoxy-based primer with surface tolerance preventing rust progression in highly humid environments. Shows very high adhesion and anti-rust features on sheet metal/steel surfaces which are not properly cleaned. Synthetic Intermediate Primer (506 Series) It is an alkyd binder based topcoat primer with high coverage, adhering very well to the first primer coat and preparing a solid and smooth surface for the topcoat paint. The product should not be applied directly to concrete, inorganic zinc and galvanized surfaces. Used as a topcoat primer under synthetic alkyd binder-based topcoat paints.

Topcoat
Sideboard Upper Structure Paint (046) It is an alkyd binder based, air dry topcoat paint which can be applied to side boards, superstructures and inner parts of boats. Has excellent durability, high gloss and color retention features. Epoxy Topcoat (169 SERIES) It is a double-compound, epoxy-polyamide based, glossy topcoat. Has a perfect adhesion feature. Extremely resistant to abrasion and friction. Resistant to sea water, mineral oils and many chemical substances. Dry film thickness of 40 microns is recommended in 1-2 coats during application. Boot Top Paint (045 Series) It is an alkyd binder based, air-dry glossy boot top paint with colophony resin additives. It is a very good protector on the boot top which is exposed to the most severe conditions on the sea. Adheres to the surface very well. Resistant to water, oil and friction. Deck Stain (041 SERIES) It is a high-quality alkyd binder-based deck topcoat stain modified to resist periodic contact with sea water. In addition to its very good color and gloss retention, it is also resistant to corrosion in walking areas. Flexibility feature enables good adhesion on various anticorrosive primers. Should not be applied directly to concrete, inorganic zinc and galvanized surfaces. Polyurethane Acrylic Topcoat (155 SERIES) It is a double-component, polyurethane acrylic based topcoat paint. Resistant to all kinds of scratches, impacts and yellowing that will occur in the marine environment due to its acrylic structure. Has a very high gloss and color retention feature.

Antifouling
TBTO Free Antifouling (279-2575) It is a seasonal-lasting and high-resistance antifouling paint, specifically designed to prevent the surfaces in water from being covered and trapped by bacteria, moss, shellfish and similar organisms. The product does not contain TBTO in compliance with international standards. It has been certified by the British classification society Lloyd's Register. TBTO Free Antifouling (Long Life) (279-2710) It is a long-lasting and high-resistance antifouling paint, specifically designed to prevent the surfaces in water from being covered and trapped by bacteria, moss, shellfish and similar organisms. The product does not contain TBTO in compliance with international standards. It has been certified by the British classification society Lloyd's Register.

Varnish
PACKINK-LAK Glossy Varnish (617 Series) It is a single-component, alkyd resin-based, air-dry, glossy varnish. Provides a full and glossy appearance due to its high solid content. It is extremely resistant to scratches and abrasion. Resistant to solar rays and sea water. At least 3 coats are applied by allowing one-day in between the coats during the application process. It is applied to the inner and outer wooden parts of watercraft floating above the waterline. Synthetic Yacht Varnish, Glossy (345) It is a single-component, alkyd based, air-dry, glossy wood varnish developed for use on yachts and boats. Forms anti-scratch and anti-abrasion, hard, elastic and very glossy surfaces. Resistant to solar rays, sea water and atmospheric conditions. At least 3 coats are applied by allowing one day in between the coats during the application process. It is applied to the inner and outer wooden parts of watercraft floating above the waterline.

Special Purpose Products
Epoxy Lamination Resin It is a double-component, solvent-free, epoxy-based transparent adhesive and fiber coating lamination resin. It is used in bonding and fiber coating processes on wooden boats and in bonding, repair and maintenance works on fiber boats. Has high mechanical and physical resistance. Can be used as filler resin and adhesive by adding fill materials. It is also used as the first primer with low viscosity for osmosis treatment on fiber boats. Can be applied with a brush, roller and airless gun. Luminescent Paint (041-0706) It is an alkyd resin-based, glossy topcoat paint containing special luminescent pigments. Provides a more comfortable vision of the surface in dark environments thanks to its luminescent structure. Can be used for safety reasons on boats. It can also be used in fire escapes in hotels and buildings as well as to highlight emergency exits. Anti-skid Paint (041) It is an alkyd resin-based, synthetic, semi-matt anti-skid topcoat developed for use on wet floors on decks. Provides safety by preventing feet from slipping on boat decks, on the edge of pools and on stairs. Polyurethane Deck Coating (KPA SERIES) It is a double-component, polyurethane based, solvent-free coating and insulation material. It is used for coating all kinds of wood, metal, stone, plaster, etc. surfaces and for waterproofing purposes. It is particularly used for waterproofing of tanks, pipes and concrete structures on the decks of boats and ships. Suitable for brush and roller application. By this means, it provides ease of use on decks and areas where spatula cannot be used for application. Completely fills the surface in the plywood bonding process and prevents gaps and water ingress from occurring. No change in volume is observed after fully dried. PU thinner is used for thinning, if required. The product is cream colored. PU Impregnated Wooden Boat Primer (EMP SERIES) It is a single-component, polyurethane-based, moisture curing, first layer transparent impregnated wood primer. Can be applied on all wooden surfaces with brush, roller and airless gun. Since its ability to penetrate into wood pores is very high, it saturates the wood and enhances the adhesion ability of putty and primers to be applied on it. It should be thinned with polyurethane thinner by 20-40% and applied in a manner not leaving a glossy film on the surface. In applications exceeding 8 hours in between the layers, the surface should be lightly sanded for the other coat to be applied.
Need a specific grade?
Tell us your press, substrate, and volume — we'll point you to the right line.