Product catalog
Products
3 product(s) in PACKINK Mix
PACKINK Mix
PACKINK Mix is mixing and dosing equipment for building an ink batch from bases, varnishes, and additives. Dosing keeps each part in the ratio the formula asks for, which is hard to hold by hand on a busy shift.
That mix step is what turns a formula into ink the press can run. It cuts off-shade leftovers and gives the press a color and viscosity that do not need constant correction.

AK200 Barrel
AK200 Barrel is a PACKINK Mix mixer for product held in a barrel. It mixes, homogenizes, and disperses color through the drum so pigment and binder do not settle into layers before the ink or coating is drawn off. It sits between the AK20 bucket and the AK1000 IBC: too much for a pail, not a full intermediate bulk container. Run it before a barrel is taken to the press or the filling line, and long enough for the color to be even from top to bottom.

AK1000 IBC
AK1000 IBC is a PACKINK Mix mixer for an intermediate bulk container, the large tote used when a batch is too big for a barrel. It mixes, homogenizes, and works color through the full container so a bulk ink or coating stays one shade instead of separating in storage. Use it for production lots that are filled, stored, or drawn from an IBC. Stirring only the top leaves the bottom unmatched. The AK1000 is the bulk step after the AK20 bucket and the AK200 barrel.

AK20 Bucket
AK20 Bucket is the small PACKINK Mix mixer, built for batches up to 60 kg. It stirs bases, varnishes, and color in a bucket so a short run or a color trial can be homogenized without opening a drum. Use it in the ink room when the batch is too small for a barrel mixer. The aim is an even mix before the ink goes to the press, not a storage vessel. Larger lots move to the AK200 barrel or the AK1000 IBC.
Need a specific grade?
Tell us your press, substrate, and volume — we'll point you to the right line.