Product catalog

Products

5 product(s) in Sheet Fed Offset Materials

Sheet Fed Offset Materials

Professional pressroom solutions for press and roller cleaning, dampening, plate preparation and protection, and routine maintenance-supporting consistent print quality and efficient operation.

Press Washes And Cleaners

Sheet Fed Offset Materials

Press washes and cleaners take ink off blankets, rollers, plates, and press parts so the next color or the next job starts clean. Hand washes are for a manual wash-up; automatic washes are metered by the press. The strength has to match the ink, including UV ink when that is what is on the rollers. PACKINK press washes are sheet-fed offset consumables. A wash that is too weak leaves ink in the roller train; one that is too strong can swell rollers or attack plates. Use the grade specified for the ink and the roller covering, and keep wash off the paper.

Fountain Solutions

Sheet Fed Offset Materials

Fountain solutions are the dampening mixes on an offset press. Non-image areas of the plate must stay wet enough to refuse ink, while the image takes ink. Water plus a measured concentrate is what holds that balance through the run. PACKINK fountain solutions are diluted to press strength, not used neat. Correct dosing limits scumming, toning, and over-emulsified ink. Alcohol or alcohol-reduced grades, acidity, and the water in the press all change the result, so the concentrate should match the dampening system and the plates.

Plate Cleaners And Developers

Sheet Fed Offset Materials

Plate cleaners and developers prepare and maintain offset plates. Developer or processor chemistry brings out the image on plates that need it. A plate cleaner removes ink, scum, and light oxidation from a plate already on press, so the non-image areas take water again. PACKINK plate-care products are for the sheet-fed offset room. Cleaners are wiped on and rinsed as directed; they are not blanket washes. A strong cleaner on the wrong plate coating can blind the image or scratch the surface, so match the product to the plate, including CtP plates.

Press Room Maintenance Products

Sheet Fed Offset Materials

Pressroom maintenance products are the everyday materials that keep an offset press fit to print: roller pastes and deglazers, washes, and the small chemicals used between jobs. They do not replace ink or fountain solution. They stop rollers, blankets, and plates from carrying yesterday’s ink into today’s job. PACKINK groups these consumables for shops that run sheet-fed offset daily. A glazed roller will not carry ink evenly, and a blanket full of paper dust will not transfer a sharp dot. Regular maintenance with the right product is what lets the rest of the consumables perform.

Arabic Gum

Sheet Fed Offset Materials

Arabic gum is the classic plate gum for offset lithography. Wiped onto a plate, it protects non-image metal from oxidation and helps those areas stay water-receptive, which is why plates are gummed during a stop and often before they are stored. PACKINK Arabic gum is a pressroom product, not a fountain solution by itself. Lay a thin, even film on a clean plate and do not leave thick ridges that can mark the blanket. It preserves the plate between runs; it does not remove dried ink the way a plate cleaner does.

Need a specific grade?

Tell us your press, substrate, and volume — we'll point you to the right line.

Contact sales