
Product
Dyes And Colorants
None
Description
Dyes and colorants put color into paper, tissue, egg trays, and molded pulp. Unlike a surface ink, many of these are added in the pulp or at the size press, so the sheet or molded piece is colored through the fiber, not only on the face.
PACKINK dyes are for mills and molded-fiber lines that need the same shade from run to run. Choose the dye for the fiber — virgin, recycled, or molded pulp — and for whether the color must resist water or only identify the product. Retention and fixing are part of an even result.
From the catalog
Related products
More from the same categories — browse similar lines in our catalog.

Paper Process Additives
Paper process additives help a paper machine or molded-pulp line drain, hold fines and filler, and keep foam under control. Slow drainage limits speed; poor retention wastes fiber and makes a dusty or weak sheet; foam marks the surface. PACKINK process additives are chosen for the wet end, not as one general chemical. A retention aid, a drainage aid, and a defoamer solve different problems and should be dosed where the process needs them. The aim is a stable sheet or tray at the speed the line is meant to run.

Sizing Agents
Sizing agents slow the rate at which water soaks into paper or board. Internal size works in the furnish; surface size works at the size press. Either way the sheet resists water better and often takes ink and coating more evenly. PACKINK sizing agents are for paper and packaging boards that must hold a print, a coating, or a liquid without immediate strike-through. The grade and the point of addition depend on the furnish and on how much resistance the finished sheet needs.

Process Aids
Process aids are the supporting chemicals that keep paper and molded-pulp production stable. They help the line run cleanly, hold formation, and avoid the small upsets that become breaks, spots, or wasted pulp. PACKINK process aids sit beside dyes and sizing agents. They are not the color and not the water-repellent size; they are what makes those steps behave on a real machine. Use the aid that matches the problem — stability, cleanliness, or runnability — rather than treating every wet-end chemical as the same.