Product
Pipe and Profile
None
Description
222 Seri (Shop Primer)
It is a two-component protective primer containing PVB (Polyvinyl butyral) based anticorrosive pigment. It is used as a primer to increase adhesion and as a protective primer on light metal surfaces such as metal sheets, galvanized metal sheets and aluminum in metal goods and automotive industry. Shop primer increases the adhesion of the coats to be applied on it to metal surfaces thanks to its binder structure and the added anticorrosive pigments and prevents corrosion.
594 Series (Water Based Pipe Paints)
It is a water based synthetic resin-based paint with high adhesion and corrosion resistance properties. It is a primer especially used in painting pipe profiles and exterior surfaces of pipes.
From the catalog
Related products
More from the same categories — browse similar lines in our catalog.

Specialty Vehicles Equipment and Construction Equipment
113 Series (PACKINK Acrylic 2K Topcoat) It is a two-component PU acrylic/isocyanate-based glossy topcoat with high gloss retention, elasticity features and high mechanical and chemical resistance. 115 Series (PACKINK Acrylic Topcoat) It is a two-component, acrylic/isocyanate-based glossy topcoat with high gloss retention and elasticity features and high mechanical and chemical resistance. It has been developed for commercial and passenger vehicles and has a higher solid content compared to conventional topcoats. 156 Series (4+1 Acrylic Topcoat HP) It is a two-component acrylic/isocyanate-based glossy topcoat with gloss retention, elasticity features and high mechanical and chemical resistance with a rapid drying attribute and baking finish. 192 Series (HS Topcoat) It is a two-component acrylic/isocyanate based, environmentally friendly, high solid glossy topcoat with high gloss retention, elasticity features and high mechanical and chemical resistance. (VOC <420g/L) 537 Series (HB Epoxy Filler) It is a two-component, epoxy-based primer containing zinc phosphate. Easy grindability and high rust resistance are its typical features. Yields excellent results especially on steel surfaces. It is the primer coat of anticorrosive paint systems. Types containing micaceous iron oxide powder for the transformer industry are available. The product codes that can be applied by pouring and spraying methods are different. 596 Series (LVC Epoxy Primer) It is a two-component, epoxy-based primer containing a high proportion of anticorrosive pigments. The amount of volatile organic compounds (VOC) is below the legal limit specified for primers. Has a higher coverage area compared to conventional epoxy based primers.

Electricity
113 Series (PACKINK Acrylic 2K Topcoat) It is a two-component PU acrylic/isocyanate-based glossy topcoat with high gloss retention, elasticity features and high mechanical and chemical resistance. 114 Series (PU Topcoat Paint) PU Topcoat FD is a two-component alkyd/isocyanate-based glossy topcoat with gloss retention, elasticity features and high mechanical and chemical resistance with rapid drying attributes and baking finish. 196 Series (4+1 Acrylic Topcoat HP) 4+1 Acrylic Topcoat HP is a two-component acrylic/isocyanate-based topcoat with gloss retention, elasticity features and high mechanical and chemical resistance with rapid drying attributes and baking finish. 366 Series (UNI-COAT) It is a one-component protective primer/topcoat/one coat. It is used as an anticorrosive protective primer/topcoat/one coat on light metal surfaces such as metal sheets, galvanized metal sheets and aluminum in metal goods and automotive industry. Its rapid drying time, adhesion, elasticity, gloss retention and physical resistance features are excellent. Suitable for alkyd, epoxy and acrylic topcoat applications on it. 368 Series (Thermolux Enamel) Super Auto Thermolux Enamel is a polyester/melamine resin-based, topcoat paint with baking finish feature. Its adhesion, elasticity, gloss retention, physical and chemical resistance features are excellent. 400 Series (Rapid Varnish) It is a modified synthetic resin based, baking finish insulation varnish. Specifically developed for the insulation of cables used in electrical motor blocks. Good adhesion to light metals. It is resistant to a maximum temperature of 140°C. 425 Series (PACKINK-pol EHS Topcoat) High solid 2K acrylic topcoat is a high solid, two-component acrylic/isocyanate based environmentally friendly glossy topcoat with high gloss retention, elasticity features and high mechanical and chemical resistance durability. 520 Series (Zinc-Load Epoxy Primer) It is a two-component, epoxy polyamide based product which combines the protection of metallic zinc with the adhesion and durability of epoxy resin. It is the primer layer of the epoxy paint system applied to prevent oxidation of steel surfaces and impacts of chemical substances. 520 Series (One-Component Protective Primer) It is a PVB based, one-component primer. It is used to perfect the adhesion of the paint coats to be applied afterwards on light metal surfaces such as aluminum, stainless steel and galvanized metal. Increases the corrosion resistance of the paint system. 537 Series (HB Epoxy Filler) It is a two-component, epoxy-based primer containing zinc phosphate. Easy grindability and high rust resistance are its typical features. Yields excellent results especially on steel surfaces. It is the primer coat of anticorrosive paint systems. Types containing micaceous iron oxide powder for the transformer industry are available. The product codes that can be applied by pouring and spraying methods are different. 547 Series (High Solid Epoxy Primer) It is a two-component epoxy based anticorrosive primer. It is a thixotropic coating material containing high solid materials. Can be applied in thick coats. Resistant to acid, alkali, petroleum products, water and solvents. It is a product developed for pouring applications. 574 Series (Stone Chip Primer-Miox) Non-Sanding Primer is developed to be used without sanding and which has high filling properties. Can be sanded if necessary or desired. Forms a perfect surface for topcoats when used after sanding. Has a very good adhesion property on metals and cataphoresis primer. It is a product developed for pouring applications. 591 Series (1K Water Based Topcoat) It is a high solid, water-based topcoat and emulsion acrylic based topcoat to be applied on primer which is cured in 15 minutes at 60°C or air dries in 2 hours. 592 Series (High Solid Epoxy Primer) It is a two-component epoxy based anticorrosive primer. It is a thixotropic coating material containing high solid materials. Can be applied in thick coats. Resistant to acid, alkali, petroleum products, water and solvents. It is a product developed for airless spray gun applications in the transformer industry. 595 Series (Water Based HS Primer) It is a water based high solid HS Primer, emulsion acrylic based primer with excellent adhesion and elasticity features. It must be baked at 80°C/30 minutes as force-dry to ensure final hardness. Provides excellent adhesion performance to metal, cast iron and steel surfaces thanks to its superior adhesion strength. It is also suitable for immersion application. 691 Series (Water Based HS Topcoat) It is a styrene acrylic emulsion resin-based with very good direct adhesion to metal features. It must be baked at 70°C for 20 minutes to ensure final hardness. Provides excellent adhesion performance on metal and steel surfaces thanks to its superior adhesion power. The desired thickness can be achieved with its high solid feature.

Home Appliances
113-5000 (2K Acrylic Varnish) It is a two component PU acrylic/isocyanate-based glossy varnish with gloss retention, elasticity features and high mechanical and chemical resistance. 125 Series (PU Solvent Based Topcoat Paint) It is a two component (2K) acrylic resin based topcoat with high coverage, elasticity and impact resistance features. PU Topcoat Paint has been developed for application directly on surfaces such as ABS, PC and PS. 152 Series (Solvent Based 2K Acrylic Single-Coat Glossy Paint) It is a double-component acrylic/isocyanate-based glossy topcoat with gloss retention, elasticity features and high mechanical and chemical resistance with a rapid drying attribute and baking finish. It is a topcoat developed for ABS surfaces for use in places where chemical resistance (water, moisture, hot cold exchange), UV resistance and mechanical resistance are required. Provides a glossy finish without the need to apply any varnish. 221 Series (Water Based Topcoat) Styrene acrylic emulsion based paint with high hardness, excellent adhesion and chemical resistance feature. 251 Series (Water Based Topcoat) Styrene acrylic emulsion-based paint with high hardness, excellent adhesion and chemical resistance feature. Water based paint; acrylic emulsion-based paint with high hardness, excellent adhesion and chemical resistance feature. 291 Series (Water Based Midcoat) It is a styrene acrylic emulsion based midcoat paint with high hardness, excellent adhesion and chemical resistance features. Applied as a midcoat under UV varnish. UV varnish should also be applied on top of it. 357 Series (Water Based Topcoat) Styrene acrylic emulsion-based paint with excellent hardness, adhesion and chemical resistance feature. Acrylic emulsion based, water-based topcoats. 599 Series (Water Based Primer) It is an epoxy ester-melamine based economical primer with baking finish, very good adhesion and elasticity features. N43-9344 (PACKINK Anti-Fingerprint varnish) It is a nanotechnological and glossy (> 85 gloss, 60°) varnish applied on inox kitchen utensils and all kinds of stainless steel and aluminum surfaces (oven, hood, refrigerator covers, dishwasher covers, etc.) without leaving any fingerprints and which is water and oil repellent, easy to clean, with high elasticity, mechanical and chemical resistance features. N77-0001 (Oleophobic Coating) In addition to providing easy cleaning with its long lasting oil repellent (oleophobic) and water repellent (hydrophobic) attributes, it is a coating produced for the white goods sector providing excellent optical properties, short curing time and stackability, high scratch resistance and high temperature tolerance giving antibacterial properties.