
Product
Printing Thinner B
None
Printing Thinner B reduces viscosity and is chosen when the ink also needs to dry faster on the substrate. Faster drying helps a high-speed web release cleanly and reduces set-off or blocking in the rewind.
Use PACKINK Thinner B on solvent inks when drying, not only thickness, is the limit. It still dilutes the ink, so check color strength and viscosity together. It is the fast-drying grade, not a stand-in for the slower thinners.
From the catalog
Related products
More from the same categories — browse similar lines in our catalog.

Printing Thinner A
Printing Thinner A is the general solvent for reducing a printing ink and holding its viscosity. When a flexo or gravure ink is too heavy, a controlled addition brings it back to the flow the anilox or cylinder expects, without using a retarder or a fast-dry blend by mistake. PACKINK Thinner A is the everyday reducer. Add it gradually as solvent evaporates during the run, and recheck flow each time. It is for dilution and viscosity control, not for changing the drying speed of an ink that is already transferring well.

Printing Thinner C
Printing Thinner C is the slower-drying reducer. It lowers viscosity and gives the ink more time to transfer and level before the solvent leaves the film. That helps when ink is drying in the cells, on the plate, or before it has wet the substrate. PACKINK Thinner C is for solvent inks that look starved or pinholed because they set too quickly. Add it to improve transfer, then confirm the web still dries before rewind or stacking. It is a retarding thinner, not a faster one.

Printing Thinner D
Printing Thinner D sits between the fast and slow grades. It dilutes the ink and keeps drying in a middle range, so flow stays smooth without a sharp change in open time. PACKINK Thinner D is the balanced correction for a run that is already close: the ink transfers, but viscosity or flow needs a nudge that should not push drying hard either way. Adjust in small steps and watch both cup viscosity and the print.