
Product
Rub Resistance Additives
None
Description
Rub resistance additives make a dried ink film harder to scuff, scratch, or smear when packs rub in transit, on a filling line, or in a stack. They are used when the color is right but the surface marks too easily.
PACKINK rub additives are blended in at the dosage the formula allows. More is not always better: too much can dull gloss or affect adhesion and sealing. They suit cartons, labels, and flexible packs that must stay clean after handling.
From the catalog
Related products
More from the same categories — browse similar lines in our catalog.

Adhesion Promoters
Adhesion promoters help ink hold on films and other surfaces that resist ordinary binders, especially polyethylene, polypropylene, and some coated boards. Without them a print can look correct and still fail a tape test or peel in the laminate. PACKINK adhesion promoters go into the ink the way the formula specifies, not as a random press-side pour. They are for solvent and water-based packaging inks where the substrate, not the color, is the problem. Match the promoter to the ink system before it enters a finished batch.

Slip And Wax Additives
Slip and wax additives change the surface of a dried ink or varnish. Wax improves scratch resistance and can reduce blocking; slip additives lower friction so sheets and webs move without grabbing. PACKINK supplies them for packaging inks that must slide, stack, or resist scuffing. The type and the amount depend on whether the next step is lamination, heat sealing, or simple stacking. Too much slip can hurt adhesion or seal strength, so follow the formula.

pH Adjusters And Stabilizers
pH adjusters and stabilizers keep water-based inks in the alkaline range they were built for. As amine leaves an open or circulating ink, pH falls, viscosity rises, and the ink can thicken, dry in the anilox, or lose stability. PACKINK pH products are added in small measured doses and checked with a meter, not by eye. They support consistent water-based print on flexo and related presses. They are not a thinner: if the ink is thick only because water has left, correct viscosity and pH separately.