Product catalog

Products

59 product(s) in Paints

Paints

Paints from PACKINK include decorative finishes and the industrial coatings used on metal, wood, vehicles, and marine structures. A living-room wall and a steel tank do not need the same film, so the catalog keeps those families apart.

Decorative paints are chosen for appearance, washability, and indoor or outdoor exposure. Industrial paints are chosen for adhesion, corrosion resistance, and how they are applied — spray, coil, or refinish. Start from the surface, then the color.

Specialty Vehicles Equipment and Construction Equipment

Industrial Paints

113 Series (PACKINK Acrylic 2K Topcoat) It is a two-component PU acrylic/isocyanate-based glossy topcoat with high gloss retention, elasticity features and high mechanical and chemical resistance. 115 Series (PACKINK Acrylic Topcoat) It is a two-component, acrylic/isocyanate-based glossy topcoat with high gloss retention and elasticity features and high mechanical and chemical resistance. It has been developed for commercial and passenger vehicles and has a higher solid content compared to conventional topcoats. 156 Series (4+1 Acrylic Topcoat HP) It is a two-component acrylic/isocyanate-based glossy topcoat with gloss retention, elasticity features and high mechanical and chemical resistance with a rapid drying attribute and baking finish. 192 Series (HS Topcoat) It is a two-component acrylic/isocyanate based, environmentally friendly, high solid glossy topcoat with high gloss retention, elasticity features and high mechanical and chemical resistance. (VOC <420g/L) 537 Series (HB Epoxy Filler) It is a two-component, epoxy-based primer containing zinc phosphate. Easy grindability and high rust resistance are its typical features. Yields excellent results especially on steel surfaces. It is the primer coat of anticorrosive paint systems. Types containing micaceous iron oxide powder for the transformer industry are available. The product codes that can be applied by pouring and spraying methods are different. 596 Series (LVC Epoxy Primer) It is a two-component, epoxy-based primer containing a high proportion of anticorrosive pigments. The amount of volatile organic compounds (VOC) is below the legal limit specified for primers. Has a higher coverage area compared to conventional epoxy based primers.

Pipe and Profile

Industrial Paints

222 Seri (Shop Primer) It is a two-component protective primer containing PVB (Polyvinyl butyral) based anticorrosive pigment. It is used as a primer to increase adhesion and as a protective primer on light metal surfaces such as metal sheets, galvanized metal sheets and aluminum in metal goods and automotive industry. Shop primer increases the adhesion of the coats to be applied on it to metal surfaces thanks to its binder structure and the added anticorrosive pigments and prevents corrosion. 594 Series (Water Based Pipe Paints) It is a water based synthetic resin-based paint with high adhesion and corrosion resistance properties. It is a primer especially used in painting pipe profiles and exterior surfaces of pipes.

Electricity

Industrial Paints

113 Series (PACKINK Acrylic 2K Topcoat) It is a two-component PU acrylic/isocyanate-based glossy topcoat with high gloss retention, elasticity features and high mechanical and chemical resistance. 114 Series (PU Topcoat Paint) PU Topcoat FD is a two-component alkyd/isocyanate-based glossy topcoat with gloss retention, elasticity features and high mechanical and chemical resistance with rapid drying attributes and baking finish. 196 Series (4+1 Acrylic Topcoat HP) 4+1 Acrylic Topcoat HP is a two-component acrylic/isocyanate-based topcoat with gloss retention, elasticity features and high mechanical and chemical resistance with rapid drying attributes and baking finish. 366 Series (UNI-COAT) It is a one-component protective primer/topcoat/one coat. It is used as an anticorrosive protective primer/topcoat/one coat on light metal surfaces such as metal sheets, galvanized metal sheets and aluminum in metal goods and automotive industry. Its rapid drying time, adhesion, elasticity, gloss retention and physical resistance features are excellent. Suitable for alkyd, epoxy and acrylic topcoat applications on it. 368 Series (Thermolux Enamel) Super Auto Thermolux Enamel is a polyester/melamine resin-based, topcoat paint with baking finish feature. Its adhesion, elasticity, gloss retention, physical and chemical resistance features are excellent. 400 Series (Rapid Varnish) It is a modified synthetic resin based, baking finish insulation varnish. Specifically developed for the insulation of cables used in electrical motor blocks. Good adhesion to light metals. It is resistant to a maximum temperature of 140°C. 425 Series (PACKINK-pol EHS Topcoat) High solid 2K acrylic topcoat is a high solid, two-component acrylic/isocyanate based environmentally friendly glossy topcoat with high gloss retention, elasticity features and high mechanical and chemical resistance durability. 520 Series (Zinc-Load Epoxy Primer) It is a two-component, epoxy polyamide based product which combines the protection of metallic zinc with the adhesion and durability of epoxy resin. It is the primer layer of the epoxy paint system applied to prevent oxidation of steel surfaces and impacts of chemical substances. 520 Series (One-Component Protective Primer) It is a PVB based, one-component primer. It is used to perfect the adhesion of the paint coats to be applied afterwards on light metal surfaces such as aluminum, stainless steel and galvanized metal. Increases the corrosion resistance of the paint system. 537 Series (HB Epoxy Filler) It is a two-component, epoxy-based primer containing zinc phosphate. Easy grindability and high rust resistance are its typical features. Yields excellent results especially on steel surfaces. It is the primer coat of anticorrosive paint systems. Types containing micaceous iron oxide powder for the transformer industry are available. The product codes that can be applied by pouring and spraying methods are different. 547 Series (High Solid Epoxy Primer) It is a two-component epoxy based anticorrosive primer. It is a thixotropic coating material containing high solid materials. Can be applied in thick coats. Resistant to acid, alkali, petroleum products, water and solvents. It is a product developed for pouring applications. 574 Series (Stone Chip Primer-Miox) Non-Sanding Primer is developed to be used without sanding and which has high filling properties. Can be sanded if necessary or desired. Forms a perfect surface for topcoats when used after sanding. Has a very good adhesion property on metals and cataphoresis primer. It is a product developed for pouring applications. 591 Series (1K Water Based Topcoat) It is a high solid, water-based topcoat and emulsion acrylic based topcoat to be applied on primer which is cured in 15 minutes at 60°C or air dries in 2 hours. 592 Series (High Solid Epoxy Primer) It is a two-component epoxy based anticorrosive primer. It is a thixotropic coating material containing high solid materials. Can be applied in thick coats. Resistant to acid, alkali, petroleum products, water and solvents. It is a product developed for airless spray gun applications in the transformer industry. 595 Series (Water Based HS Primer) It is a water based high solid HS Primer, emulsion acrylic based primer with excellent adhesion and elasticity features. It must be baked at 80°C/30 minutes as force-dry to ensure final hardness. Provides excellent adhesion performance to metal, cast iron and steel surfaces thanks to its superior adhesion strength. It is also suitable for immersion application. 691 Series (Water Based HS Topcoat) It is a styrene acrylic emulsion resin-based with very good direct adhesion to metal features. It must be baked at 70°C for 20 minutes to ensure final hardness. Provides excellent adhesion performance on metal and steel surfaces thanks to its superior adhesion power. The desired thickness can be achieved with its high solid feature.

Home Appliances

Industrial Paints

113-5000 (2K Acrylic Varnish) It is a two component PU acrylic/isocyanate-based glossy varnish with gloss retention, elasticity features and high mechanical and chemical resistance. 125 Series (PU Solvent Based Topcoat Paint) It is a two component (2K) acrylic resin based topcoat with high coverage, elasticity and impact resistance features. PU Topcoat Paint has been developed for application directly on surfaces such as ABS, PC and PS. 152 Series (Solvent Based 2K Acrylic Single-Coat Glossy Paint) It is a double-component acrylic/isocyanate-based glossy topcoat with gloss retention, elasticity features and high mechanical and chemical resistance with a rapid drying attribute and baking finish. It is a topcoat developed for ABS surfaces for use in places where chemical resistance (water, moisture, hot cold exchange), UV resistance and mechanical resistance are required. Provides a glossy finish without the need to apply any varnish. 221 Series (Water Based Topcoat) Styrene acrylic emulsion based paint with high hardness, excellent adhesion and chemical resistance feature. 251 Series (Water Based Topcoat) Styrene acrylic emulsion-based paint with high hardness, excellent adhesion and chemical resistance feature. Water based paint; acrylic emulsion-based paint with high hardness, excellent adhesion and chemical resistance feature. 291 Series (Water Based Midcoat) It is a styrene acrylic emulsion based midcoat paint with high hardness, excellent adhesion and chemical resistance features. Applied as a midcoat under UV varnish. UV varnish should also be applied on top of it. 357 Series (Water Based Topcoat) Styrene acrylic emulsion-based paint with excellent hardness, adhesion and chemical resistance feature. Acrylic emulsion based, water-based topcoats. 599 Series (Water Based Primer) It is an epoxy ester-melamine based economical primer with baking finish, very good adhesion and elasticity features. N43-9344 (PACKINK Anti-Fingerprint varnish) It is a nanotechnological and glossy (> 85 gloss, 60°) varnish applied on inox kitchen utensils and all kinds of stainless steel and aluminum surfaces (oven, hood, refrigerator covers, dishwasher covers, etc.) without leaving any fingerprints and which is water and oil repellent, easy to clean, with high elasticity, mechanical and chemical resistance features. N77-0001 (Oleophobic Coating) In addition to providing easy cleaning with its long lasting oil repellent (oleophobic) and water repellent (hydrophobic) attributes, it is a coating produced for the white goods sector providing excellent optical properties, short curing time and stackability, high scratch resistance and high temperature tolerance giving antibacterial properties.

LPG Cylinders

Industrial Paints

010 - 7917 (LPG Cylinder Paint) It is a synthetic alkyd based, rapid drying paint. Can be applied directly to cleaned surfaces or on the primer coat if more resistance is required. 010-7917 (LPG Cylinder Paint) It is a synthetic aluminum gliding alkyd based, rapid drying topcoat paint. Can be solely applied directly to cleaned surfaces or on the primer coat if more resistance is required. 051 Series (LPG Cylinder Paint) Alkyd based, fast drying, semi-matt topcoat paint. 052 - 7682 (LPG Cylinder Paint) It is a synthetic enamel alkyd based, rapid drying, semi matt, aluminum colored topcoat paint with very good adhesion to metal surfaces. 321 Series (Electrostatic Special Furnace Paint/Topcoat) It is an alkyd-amino resin based general purpose topcoat paint, oven cured,has very good adhesion and elasticity properties. 368 Series (Polyester Enamel) It is a polyester/melamine based, topcoat paint with baking finish feature. Has excellent adhesion, elasticity, gloss retention, stone-impact resistance, physical and chemical resistance features. 500 Series (Flash-off Primer) It is a oven-cured synthetic resin based filler primer. It has excellent adhesion, elasticity, high physical and chemical resistance and excellent anti-corrosion properties. It is used for wet on wet applications under oven cured topcoats in order to time and heat saving at high production speeds. 574 Series (Stone Chip Primer) It is a primer with high filling features developed to be used without sanding. It has excellent adhesion property on bare metal sheets and cataphoresis primer.

Machinery

Industrial Paints

113 Series (PACKINK Acrylic 2K Topcoat) It is a two-component PU acrylic/isocyanate-based glossy topcoat with high gloss retention, elasticity features and high mechanical and chemical resistance. 156 Series (4+1 Acrylic Topcoat HP) It is a two-component acrylic/isocyanate-based glossy topcoat with gloss retention, elasticity features and high mechanical and chemical resistance with a rapid drying attribute and baking finish. 214 Series (PACKINKLUX ACRYLIC 2K TOPCOAT) PACKINKLUX 2K Acrylic Topcoat is a two-component acrylic/isocyanate-based glossy topcoat with high gloss retention and elasticity properties and high mechanical and chemical resistance. Recommended to be used with 879-0787 acrylic hardener. 245 Series (Cellulosic Topcoat) It is a cellulosic based, high gloss topcoat paint. Rapid drying ability, elasticity and high gloss appearance are its prominent properties. 520 Series (One-Component Protective Primer) It is a PVB based, one-component primer. It is used to perfect the adhesion of the paint coats to be applied afterwards on light metal surfaces such as aluminum, stainless steel and galvanized metal. Increases the corrosion resistance of the paint system. 537 Series (HB Epoxy Filler) It is a two-component, epoxy-based primer containing zinc phosphate. Easy grindability and high rust resistance are its typical features. Yields excellent results especially on steel surfaces. It is the primer coat of anticorrosive paint systems. Types containing micaceous iron oxide powder for the transformer industry are available. The product codes that can be applied by pouring and spraying methods are different.

Auto Sub-Industry

Industrial Paints

020 Series (Heat Resistant Paint) It is a silicone resin-based, oven-cure or paint. It protects surfaces such as chimneys, exhaust pipes, combustion chambers and cookers, by applying 35-40-micron film thickness where high heat resistance is required. Heat resistance is between 550°C-600°C depending on the type of the pigment used. 113 Series (2K Acrylic Varnish) It is an acrylic isocyanate-based varnish with gloss retention and elasticity properties and high mechanical and chemical resistance designed for automotive and automotive sub-industry. 113 Series (PACKINK Acrylic 2K Topcoat) It is a two-component PU acrylic/isocyanate-based glossy topcoat with high gloss retention, elasticity features and high mechanical and chemical resistance. 113-5195 (2K Acrylic Varnish) It is an acrylic/isocyanate-based varnish with gloss retention and elasticity properties and high mechanical and chemical resistance designed for automotive and automotive sub-industry. Its most important property is the high UV resistance. It is especially recommended to be used on bumper surfaces thanks to its ease of application. 113-9340 (PACKINK Acrylic 2K Topcoat) It is a two-component acrylic/isocyanate based, environmentally friendly glossy topcoat, with gloss retention, elasticity properties and high mechanical and chemical resistance. 115 Series (PACKINK Acrylic Topcoat) It is a two-component, acrylic/isocyanate-based glossy topcoat with high gloss retention and elasticity features and high mechanical and chemical resistance. It has been developed for commercial and passenger vehicles and has a higher solid content compared to conventional topcoats. 117 Series (HS Termocryl Basecoat) HS Termocryl Metallic Base coat, prepared with specially selected durable aluminum pigments, is a high solid product with a mixture of synthetic resin that provides good appearance and spreading. Transparent acrylic varnish can be applied after a very short pre-evaporation period. 125 Series (2K Acrylic Topcoat) It is a two component (2K) acrylic resin based topcoat with high coverage, elasticity and impact resistance features. Acrylic Topcoat Paint has been developed to be applied directly to surfaces such as ABS, PC, PS. 125 Series (PU Solvent Based Topcoat Paint) It is a two component (2K) acrylic resin based topcoat with high coverage, elasticity and impact resistance properties. Acrylic Topcoat Paint has been developed to be applied directly to surfaces such as ABS, PC, PS. 127 Series (HS Metallic Basecoat) It is a one component high solid acrylic resin-based topcoat with high coverage, applicability in various layers, elasticity and impact resistance features. Particularly suitable for diamond application. 141 Series (PACKINK-base Basecoat) PACKINK-base is a base coat system with excellent spreading, fast drying, tapeable, washable base coat system with high color compatibility resulting very well in complete painting, paint renewal and retouching processes. Transparent acrylic varnish should be applied over a very short pre-evaporation period in order to provide its physical maintenance. 368 Series (Polyester Enamel) It is a polyester/melamine based, topcoat paint with baking finish feature. Has excellent adhesion, elasticity, gloss retention, stone impact resistance, physical and chemical resistance features. 369 - Series (Soft Touch Topcoat) It is a two-component, polyester/isocyanate-based topcoat series with high elasticity property, mechanical and chemical resistance. Soft Touch Topcoat has specifically been developed for interior plastic parts of vehicles (PP, PP+EPDM, ABS, PC). It can also be applied to the plastic parts of various electrical household appliances, mobile phone covers and many plastic surfaces where a touch of difference is desired. 369 - Series (Soft Touch Varnish) It is a double-component, polyester/isocyanate-based varnish with elasticity, mechanical and chemical resistance. 376 Series (1K UNI-PRIMER) It is an alkyd/acrylic resin-based primer designed for painting cast iron parts with dipping and spray applications. Its rapid drying time, adhesion, elasticity, gloss retention and physical resistance properties are excellent. Suitable for alkyd, epoxy and acrylic topcoat applications on it. It can be applied directly to metal surfaces such as casting, aluminum, stainless steel and galvanized metals. 378 - 9084 (Slide Paint) Termomar Enamel is a oven-cured polyester/melamine resin-based topcoat, modified to have high scratch resistance. Can be used as semi-matt topcoat where scratch resistance and stonechip resistance is required in the automotive sector and can be applied directly to cataphoresis coated surfaces. 378 Series (Termomar Enamel) It is an acrylic modified polyester/melamine based, high solid, topcoat with a baking finish. Has excellent adhesion, hardness, elasticity, gloss retention, scratch resistance, stone impact resistance, physical and chemical resistance features. 398 - 9084 (Akrilik Kızak Boyası)-en It is a oven-cured, polyester/melamine resin-based paint modified to have high scratch resistance. Can be used as semi-matt topcoat where scratch resistance and stone impact resistance is required in the automotive sector and can be applied directly to cataphoresis coated surfaces. 398 Series (HS Termocryl ENAMEL) It is an acrylic melamine-based, high solid, baking finish topcoat paint. Has excellent adhesion, elasticity, gloss retention, stone impact resistance, physical and chemical resistance features. 412 Series (Industrial Primer) It is an air-dry synthetic primer. Its typical properties; rapid drying, good sandable and excellent adhesion. 450 Series (Engine Block Paint) It is an alkyd based, rapid air-dry, synthetic paint containing anticorrosive pigments. It has good adhesion to metal and cast surfaces due to the binder and filler type has contained. Also it has high physical performance and good chemical resistance. 471-9042 / 471-9273 (HS Termocryl Vernik)-en 471-9042 / 471-9273 (HS Termocryl Varnish) Thermocryl acrylic and amino resin-based varnish group with a baking finish feature. Glossy appearance, gloss retention features and chemical and physical resistance are its typical characteristics. It is used as a varnish coat of metallic basecoat paint system on powder primer in aluminum rim industry. (471-9042 ; Glossy, 471-9273; semi-matt). 502 Series (Synthetic Primer) It is a rapid drying, alkyd resin-based economical primer. Used as a primer under air-dry topcoat paints on all iron and steel surfaces. 506 Series (Universal Primer) It is a synthetic resin-based product with excellent adhesion to varies surfaces, high elasticity and high chemical resistance properties. Universal primer is suitable for wet on wet applications. 507 Series (1K PACKINK-Pox Primer) It is an air-dry, epoxy ester-based primer. It has excellent adhesion to varies surfaces and high chemical and physical resistance properties. Can be used as a primer when high corrosion resistance is required. 520 Series (Exhaust Paint) It is rich in zinc content, synthetic resin based, single-component, air-dry primer high corrosion resistance. It is used as a primer where heat resistance or corrosion resistance is required. Heat resistance is up to 400°C. 525 Series (Anticorrosive Primer) It is a modified alkyd resin based, air-dry primer with corrosion and humidity resistance containing anticorrosive pigments and designed to paint especially pier pillars, steel parts, construction parts and casting. 533-1419 (4+1 Acrylic Primer) 4+1 Acrylic Primer is a two-component PU acrylic product which is used under topcoat for filler purposes. It is an economical product. 533-1A78 FRP SMC (Acrylic Primer) 533-1A78 Primer has specially been developed for FRP, SMC, DCPD surfaces. Has excellent resistance to solvents and severe weather conditions. Has excellent water and humidity resistance. It is easy to sand. 533-1A78 primer has excellent adhesion to the surface and to the topcoat. In addition, the 533-1A78 primeris suitable for wet on wet applications. 537 Series (HB Epoxy Filler) It is a two-component, epoxy-based primer containing zinc phosphate. Easy grindability and high rust resistance are its typical features. Yields excellent results especially on steel surfaces. It is the primer coat of anticorrosive paint systems. Types containing micaceous iron oxide powder for the transformer industry are available. The product codes that can be applied by pouring and spraying methods are different. 543 Series (2K Plastic Surface Primer) It is a two-component thermoplastic acrylic copolymer/isocyanate-based, rapid drying primer that can adhere to surfaces such as PP+EPDM (after flame cleaning), ABS, ABS + PC and Glass reinforced polyester. 2K Plastic Surface Primer is a product with high water, humidity and chemical resistance which can be used in interior and exterior plastic parts in the automotive sector. 574 Series (Stone Chip Primer-Miox) Non-Sanding Primer is developed to be used without sanding and which has high filling properties. Can be sanded if necessary or desired. Forms a perfect surface for topcoats when used after sanding. Has a very good adhesion property on metals and cataphoresis primer. It is a product developed for pouring applications. 593 Series (Water Based Anticorrosive Paint) It is a water based high solid anticorrosive paint, vinyl acrylic copolymer resin based with high adhesion and corrosion resistance properties. Especially used in casting, automobile sub-industry and in steel industry. Has excellent adhesion performance. 596 Series (HRC Epoxy Primer) HRC Epoxy Primer is a two-component, epoxy-based product containing modified zinc phosphate. It has higher corrosion resistance than 537-series products. Excellent results especially on galvanized and steel surfaces. It can also be used as a semi-matte primer in cases when high corrosion resistance is required.

Commercial Vehicles

Industrial Paints

113 Series (2K Acrylic Varnish) It is a two-component acrylic/isocyanate-based varnish with high gloss retention, elasticity and high mechanical and chemical resistance properties. The most important property is its excellent adhesion on all basecoats. Universal 2K Acrylic Varnish is the varnish coat of the metallic paint system. It is a product developed for the automotive industry. 113 Series (PACKINK Acrylic 2K Topcoat) It is a two-component PU acrylic/isocyanate-based glossy topcoat with high gloss retention, elasticity features and high mechanical and chemical resistance. 115 Series (PACKINK Acrylic Topcoat) It is a two-component, acrylic/isocyanate-based glossy topcoat with high gloss retention and elasticity features and high mechanical and chemical resistance. It has been developed for commercial and passenger vehicles and has a higher solid content compared to conventional topcoats. 141 Series (PACKINK-base Basecoat) PACKINK-base is a base coat system with excellent spreading, fast drying, tapeable, washable base coat system with high color compatibility resulting very well in complete painting, paint renewal and retouching processes. Transparent acrylic varnish should be applied over a very short pre-evaporation period in order to provide its physical maintenance. 168 Series (HS Topcoat) It is a two-component acrylic/isocyanate based, environmentally friendly, high solid, glossy topcoat with gloss retention, elasticity properties and high mechanical and chemical resistance. (VOC <420g/L). Has a higher coverage area compared to conventional acrylic based topcoats. 168 Series (HS Varnish) It is a two-component acrylic/isocyanate based, environmentally friendly, high solid, glossy varnish with gloss retention, high elasticity and high mechanical and chemical resistance properties. (VOC <420g/L). Has a higher coverage area compared to conventional acrylic based varnishes. 355 Series (PACKINK Anti-Flammable Topcoat) It is a two component acrylic/isocyanate based acrylic high gloss topcoat with high burning resistance, gloss retention, elasticity, high mechanical and high chemical resistance properties. The most important property of the 355 series is that it is classified as a system with high fire resistance under Class 1 category as per the standard BS 476 Part 7 and as B1 as per the standard DIN 4102-1 when used together with our surface tolerant epoxy primer 537-7610-11. IR colors are also available according to the MIL DTL 53039 D Standard. 532 Series (LVC EPOXY PRIMER) It is a two-component, epoxy-based primer containing high ratio of anti-corrosive pigments. The amount of volatile organic compounds (VOC) is below the legal limit specified for primers. Has a higher coverage area than conventional epoxy based primers. 537 Series (HB Epoxy Filler) It is a two-component, epoxy-based primer containing zinc phosphate. Easy grindability and high rust resistance are its typical features. Yields excellent results especially on steel surfaces. It is the primer coat of anticorrosive paint systems. Types containing micaceous iron oxide powder for the transformer industry are available. The product codes that can be applied by pouring and spraying methods are different. 537-7610 (Surface Tolerant Fire-Retardant Epoxy Primer) It is a two-component, surface tolerant, high solid epoxy primer that can be used as a primer/topcoat. It is developed using in highly moist environments. It can especially be used on the parts of surfaces above and below the water which are present in highly corrosive environments such as ships, bridges and similar areas. Can also be used in fire retardant systems since it has a low flame dispersion. It can be used in places to protect all kinds of metal surfaces from atmospheric and chemical factors such as oil plants, refineries, etc. where surface cleaning cannot be done very well. It especially provides excellent protection against fresh and salt water. Chalking may be observed when exposed to sunlight. Can be used as the primer coat of the fire retardant paint system.

Tractors and Agricultural Machinery

Industrial Paints

051 / 071 / 072 Series (Synthetic Topcoat) It is a synthetic resin-based, air-dry and rapid-drying semi-gloss/glossy topcoat. 113 Series (PACKINK Acrylic 2K Topcoat) It is a two-component PU acrylic/isocyanate-based glossy topcoat with high gloss retention, elasticity features and high mechanical and chemical resistance. 118 Series (PACKINK Synthetic Topcoat) It is a modified alkyd resin-based, air-dry topcoat cured at low temperatures. The typical properties of PACKINK Synthetic Topcoat are high filling and coverage power, gloss, gloss retention, elasticity, mechanical and chemical resistance. 156 Series (4+1 Acrylic Topcoat HP) It is a two-component acrylic/isocyanate-based glossy topcoat with gloss retention, elasticity features and high mechanical and chemical resistance with a rapid drying attribute and baking finish. 192 Series (HS Topcoat) It is a two-component acrylic/isocyanate based, environmentally friendly, high solid glossy topcoat with high gloss retention, elasticity features and high mechanical and chemical resistance. (VOC <420g/L). 317,321 Series (Special Furnace Paint)/318, 324 Series (Termolux Enamel) It is an alkyd-amino resin-based topcoat system with baking finish, very good adhesion and elasticity features. 321/324 Series is used as a topcoat in electrostatic applications. 502 Series (Synthetic Primer) It is a rapid drying, alkyd resin-based economical primer. Used as a primer under air-dry topcoat paints on all iron and steel surfaces. 520 Series (One-Component Protective Primer) It is a PVB based, one-component primer. It is used to perfect the adhesion of the paint coats to be applied afterwards on light metal surfaces such as aluminum, stainless steel and galvanized metal. Increases the corrosion resistance of the paint system. 533 Series (4+1 Acrylic Primer) They are acrylic/isocyanate-based primers that can be used as paint primers or wet on wet primers with excellent adhesion, high filler power, easy sanding and fast drying features. 537 Series (HB Epoxy Filler) It is a two-component, epoxy-based primer containing zinc phosphate. Easy grindability and high rust resistance are its typical features. Yields excellent results especially on steel surfaces. It is the primer coat of anticorrosive paint systems. Types containing micaceous iron oxide powder for the transformer industry are available. The product codes that can be applied by pouring and spraying methods are different. 572 Series (Termolux Primer) It is an alkyd amino-based primer with a baking-finish feature. It is used in general metal industry by applying under bake-finish paints to increase the durability of the paint system and to ensure a glossier topcoat. (317/321 Series: Semi-gloss, Semi-matt, 318/324 Series: Gloss). 596 Series (LVC Epoxy Primer) It is a two-component, epoxy-based primer containing a high proportion of anticorrosive pigments. The amount of volatile organic compounds (VOC) is below the legal limit specified for primers. Has a higher coverage area compared to conventional epoxy based primers.

Road Marking Paints

Industrial Paints

010-1225/010-0876 Solvent Based Road Marking Paint (White, Yellow) It is a single-component, ready to use, acrylic modified resin-based product with excellent asphalt surface adhesion and performance. Complies with EN 1871 and KGM specifications. 200-1B21 + 200-1B31 / 200-2A95 Acrylic Road Marking Paint (White, Yellow) It is a single-component, ready to use, acrylic resin based product with excellent asphalt surface adhesion and performance. Complies with the EN 1871 standard.

Other Industries

Industrial Paints

009-1248 Water Based Road Marking Paint (White) It is a single-component, ready to use, acrylic emulsion binder-based product with excellent asphalt surface adhesion and performance. Approved with EN 1871 and KGM specifications. 113 Series (PACKINK Acrylic 2K Topcoat) It is a two-component PU acrylic/isocyanate-based glossy topcoat with high gloss retention, elasticity features and high mechanical and chemical resistance. 113-5000 (2K Acrylic Varnish) It is a two component PU acrylic/isocyanate-based glossy varnish with gloss retention, elasticity features and high mechanical and chemical resistance. 127 Series (HS Metallic Basecoat) It is a one component high solid acrylic resin-based topcoat with high coverage, applicability in various layers, elasticity and impact resistance features. Particularly suitable for diamond application. 156 Series (4+1 Acrylic Topcoat HP) It is a two-component acrylic/isocyanate-based glossy topcoat with gloss retention, elasticity features and high mechanical and chemical resistance with a rapid drying attribute and baking finish. 214 Series (PACKINKLUX ACRYLIC 2K TOPCOAT) PACKINKLUX 2K Acrylic Topcoat is a two-component acrylic/isocyanate-based glossy topcoat with high gloss retention and elasticity properties and high mechanical and chemical resistance. Recommended to be used with 879-0787 acrylic hardener. 317 Series (Alkyd Melamine Topcoat) It is oven cured alkyd amino-resin based topcoat. It has very good adhesion and high elasticity properties. Adheres perfectly to metal surfaces. It is a paint with high coverage properties, high stracth and impact resistance and which can be easily applied. Surfaces painted with Termolux maintain high gloss properties for a long time. 375 Series (Water Based Basecoat) It is a water and acrylic melamine based basecoat with a baking-finish and high elasticity property that can be applied under powder varnishes. 500 Series (Flash-off Primer) It is a oven-cured synthetic resin based filler primer. It has excellent adhesion, elasticity, high physical and chemical resistance and excellent anti-corrosion properties. It is used for wet on wet applications under oven cured topcoats in order to time and heat saving at high production speeds. 537 Series (HB Epoxy Filler) It is a two-component, epoxy-based primer containing zinc phosphate. Easy grindability and high rust resistance are its typical features. Yields excellent results especially on steel surfaces. It is the primer coat of anticorrosive paint systems. Types containing micaceous iron oxide powder for the transformer industry are available. The product codes that can be applied by pouring and spraying methods are different. 574 Series (Stone Chip Primer) It is a primer with high filling features developed to be used without sanding. It has excellent adhesion property on bare metal sheets and cataphoresis primer. 575 Series (Water Based Acrylic Primer) It is an acrylic melamine resin and water-based primer, oven cure and high elasticity properties suitable for powder varnish application.

Wooden Floorings and Parquet Industry

Furniture Paints

133 Series Glossy Synthetic Parquet Lacquer Ease of use, Scratch resistance, can be applied by brush and roller. 613-0565 Derodur 1+1 PU Multicoat Matt Varnish High scratch resistance, elasticity, no whitening in crushes impacts, advantage of using a single product instead of a sanding sealer + topcoat. A43-Series UV Al-Ox Varnish (AC1-AC4) High scratch and impact resistance, high chemical resistance, anti-yellowing, suitable for mass production, suitable for direct stacking due to the very rapid curing, high performance in less amounts, available in different colors and gloss levels. A43-Series UV Parquet Varnish Highly non-abrasive, high scratch resistance, high elasticity, antistatic, non-yellowing, antibacterial, available in different colors and gloss levels. A43-Series UV Backcoat High scratch and impact resistance, high chemical resistance, anti-yellowing, suitable for mass production, suitable for direct stacking due to the very rapid curing, high performance in less amounts, available in different colors and gloss levels.

Garden Furniture and Exterior Joineries

Furniture Paints

A21-Series Hydrolack Topcoats Non-yellowing, ease of application, resistance to atmospheric conditions, available in different colors and gloss levels. A22-Series Hydrolack Primer Non-yellowing, ease of application, resistance to atmospheric conditions, available in different colors and gloss levels. A23-Series Hydrolack 1K Varnish Non-yellowing, ease of application, resistance to atmospheric conditions, available in different colors and gloss levels. 129-Series PACKINKTEX Wood Stains Resistance to atmospheric conditions, Available in different colors. A25-Series Hydrolack 2K Varnish Rapid drying, high chemical resistance, high body, glossy, with good leveling on surface, available in different colors and gloss levels. A26-Series Hydrolack Impregnating Color Systems Non-yellowing, available in different colors, full protection against mold and fungus. A25-Series Hydrolack Topcoats Rapid drying, high chemical resistance, high body, glossy, with good leveling on surface, available in different colors and gloss levels. 163-Series Yatex Exterior Varnishes Non-yellowing, resistance to atmospheric conditions, very good adhesion, available in different colors.

Bathroom / Kitchen Furniture

Furniture Paints

601/621-Series Derodur-Ultramar Topcoats Anti-scratch and impact resistant, has high chemical resistance, non-yellowing, suitable for mass production, suitable for direct stacking due to the very rapid curing, high performance in less amounts, available in different colors and gloss levels, excellent adhesion feature. 613-0303 Insulator Prevents cracking of MDF, barrier under sanding sealer and primer, easy to apply, rapid drying. 602-Series Polyurethane Primers Very good adhesion on wooden surfaces, high filling power, elasticity, easily sanded, available in different colors. A42-Series UV Roller Primer Anti-scratch and impact resistant, has high chemical resistance, non-yellowing, suitable for mass production, suitable for direct stacking due to the very rapid curing, high performance in less amounts, available in different colors and gloss levels, excellent adhesion feature. A45-Series UV Roller Putty Anti-scratch and impact resistant, has high chemical resistance, non-yellowing, suitable for mass production, suitable for direct stacking due to the very rapid curing, high performance in less amounts, available in different colors and gloss levels, excellent adhesion. S42-1115 UV Spray Dual-Cure Primer Anti-scratch and impact resistance, high chemical resistance, non-yellowing, suitable for mass production, suitable for direct stacking due to the very rapid curing, high performance in less amounts, available in different colors and gloss levels, excellent adhesion feature.

Children's Rooms and Wooden Toys

Furniture Paints

601/621-Series Derodur-Ultramar Topcoats Anti-scratch and impact resistant, has high chemical resistance, non-yellowing, suitable for mass production, suitable for direct stacking due to the very rapid curing, high performance in less amounts, available in different colors and gloss levels, excellent adhesion feature. A25-Series Hydrolack 2K Varnish Rapid drying, high chemical resistance, high body, glossy, with good leveling on surface, available in different colors and gloss levels. A25-Series Hydrolack Topcoats Rapid drying, high chemical resistance, high body, glossy, with good leveling on surface, available in different colors and gloss levels. 602-Series Polyurethane Primers Very good adhesion on wooden surfaces, high filling power, elasticity, easily sanded, available in different colors. 621-Series Ultramar "Anti-Scratch" Topcoats Antibacterial product range, impact and scratch resistance, high chemical resistance, very low yellowing tendency, high solid content. Available in different colors and gloss levels.

Home and Office Furniture

Furniture Paints

613-Series Derodur Varnishes Anti-scratch and impact resistant, has high chemical resistance, non-yellowing feature, suitable for mass production, suitable for direct stacking due to the very rapid curing feature, high performance in less amounts, available in different colors and gloss levels, excellent adhesion feature. 701-Series Ultramar -Non-yellowing - 2+1 Acrylic Topcoat High mechanical resistance, transparency, elasticity, full non-yellowing feature, scratch resistance, available in different colors and gloss levels. 702-Series Ultramar -Non-yellowing - 2+1 Acrylic Primer High mechanical resistance, transparency, elasticity, full non-yellowing feature, scratch resistance, available in different colors and gloss levels. 703-Series Ultramar -Non-yellowing - 2+1 Acrylic Varnish High mechanical resistance, transparency, elasticity, full non-yellowing feature, scratch resistance, available in different colors and gloss levels. A71 Series Non-Yellowing 10+1 Acrylic Topcoats Transparency, elasticity, full non-yellowing, ease of use, rapid drying, open pore applications, available in different colors and gloss levels. A73 Series Non-Yellowing 10+1 Acrylic Varnishes Transparency, elasticity, full non-yellowing, ease of use, rapid drying, open pore applications, available in different colors and gloss levels. Acrylic Anti-Scratch Matt Varnish (A73-0333) Very high scratch resistance, Slip/texture, full non-yellowing , available in different gloss levels, open pore applications. 326 Series Decorid Wood Stain Application with spray, brush or cloth, homogenous coloring ability on large surfaces. 601-Series Derodur Topcoats Anti-scratch and impact resistant, has high chemical resistance, non-yellowing, suitable for mass production, suitable for direct stacking due to the very rapid curing, high performance in less amounts, available in different colors and gloss levels, excellent adhesion feature. 603-Series Sanding Sealers High filling and hiding power, ease of application and sanding, provides a good surface for topcoat application. 153 Series Patina Paint Ease of application, application with brush or cloth. 602-Series Polyurethane Primers Very good adhesion on wooden surfaces, high filling power, elasticity, easily sanded, available in different colors. 157 Series Rapid Patina Paint Ease of application, application with spray, easily wiped from the surface. 621-Series Ultramar "Anti-Scratch" Topcoats Antibacterial product range, impact and scratch resistance, high chemical resistance, very low yellowing tendency, high solid content. Available in different colors and gloss levels. 613-Series Ultramar Anti-Scratch Varnishes Very high scratch and yellowing resistance, slip/texture.

Ready Panel Industry

Furniture Paints

101 Series - Water Based Roller Inks Paint print clarity, rapid drying, pattern stability, high colorizing ability, high color fastness. 102 Series - Water Based Primers High-saturation, rapid drying, low consumption costs per m², smooth surface preparation for the pattern. 105 Series - Water Based Putties Rapid drying, high saturation, low consumption costs per m². A43-Series UV Sanding Sealer Transparent, suitable for mass production, high performance in less amounts, easy to sand. A43-Series UV Roller Melamine Primer Very good adhesion on surfaces such as melamine/metal/glass. A41-Series UV Roller Floor Paints Anti-yellowing, high hiding power and good leveling, suitable for mass production and direct stacking due to the very rapid curing. Available in different gloss levels.

Door and Joinery Sector

Furniture Paints

613-Series Derodur Multicoat Varnishes High anti-scratch feature, elasticity, shortened process times, available in different colors and gloss levels. 661-Series Polyurethane Panel Door Paints High solid content, hiding power, rapid drying, available in different colors and gloss levels. A16/A19-Series Water Based Colorants High color fastness, suitable for interior use, rapid drying, color variety. 129-Series PACKINKTEX Wood Stains Resistance to atmospheric conditions, Available in different colors. 602-Series Polyurethane Primers Very good adhesion on wooden surfaces, high filling power, elasticity, easily sanded, available in different colors. 361-Series Cellulosic Panel Door Paints Rapid drying, available in different colors and gloss levels. 341 Series Vigoloid Colored Varnish Rapid drying, transparent and vibrant colors. W02-1872/W02-1873 Doorskin Primers Rapid drying, very good adhesion to MDF/HDF surfaces, high solid content, very good hiding power. High heat, water and metal resistance.

Edge Banding

Furniture Paints

Edge banding covers the raw edge of a furniture panel — particle board, MDF, or a similar core — so the edge matches the face and does not absorb moisture or show the core. It is applied on an edge-banding line after the panel is cut and before the piece is assembled. PACKINK lists it with furniture finishes because the band has to suit the topcoat and the board. Match the width and the color to the panel, and confirm the adhesive on the band is right for the machine temperature.

Chair Industry

Furniture Paints

603/613-Series Derodur Electrostatic Varnishes Ease of application, available in different gloss levels, minimum consumption, sagging resistance. A16-Series Water-Based Colorants Suitable for interior use, rapid drying, available in different colors, homogenous coloring, transparent and vibrant colors. A14-Series Ecocolor Wood Stains High color intensity, can be used by thinning up to a ratio of 1/5, application with cloth, spray, immersion method, suitable for interior use, transparent and vibrant colors.

Fire Retardants

Furniture Paints

Fire retardants in this range are the N08 Na-nofire coatings for furniture and panel lines, used where the finish has to slow flame spread as well as look like a normal topcoat. They are coatings, not extinguishers or building insulation. The N08 series is described as anti-scratch, with high elasticity, very good adhesion, a choice of gloss levels, and high chemical resistance. Specify it when the furniture system needs that fire-retardant coat and the gloss still has to match the rest of the piece.

Putties

Car Refinish

Polyester Putty SR, Light Yellow - 920-2500 Polyester Putty SR can be used as a filler and rapid putty. Easily applied and does not drip during application and does not cause holes and lines to be formed. Dries quickly, sanding can be done after a short time even at low temperatures. Can be sanded lightly and easily. It has no risk of tearing. Has high elasticity and impact resistance features. Can be applied on cleaned bare sheet metal, galvanized, fiberglass, wood and polyester surfaces as well as on epoxy primer applied surfaces. Polyester Putty GV, White Cream - 920-1618 Polyester Putty GV is a double-component polyester-based putty. Easily applied and does not drip during application and does not cause holes and lines to be formed. Dries quickly, sanding can be done after a short time even at low temperatures. Can be sanded lightly and easily. It has no risk of tearing. Has high elasticity and impact resistance features. Polyester Putty GV has been developed especially for galvanized surfaces and can also be used on sheet metal surfaces. Galvanize Putty 920-2GV1 Galvanize Putty has been developed specifically for galvanized surfaces and can also be used on sheet metal surfaces. Metallic Polyester Putty - 920-7A71 It is a metallic polyester putty. Can be applied on sheet metal, galvanized and polyester surfaces as well as on epoxy primer applied surfaces. Fiber Putty - 920-7397 Fiber putty contains special glass fiber additives and is used as a putty filler. It is also suitable for use on composite materials and curved surfaces. PACKINK Polyester Putty, Gray - 920-7912 PACKINK- Polyester Putty can be used as a putty filler and rapid putty. Can be applied on cleaned bare sheet metal, galvanized, fiberglass, wood and polyester surfaces as well as on epoxy primer applied surfaces. Es Polyester Putty, Light Yellow - 920-2300 ES Polyester Putty can be used as a putty filler and rapid putty. Can be applied on cleaned bare sheet metal, galvanized, fiberglass, wood and polyester surfaces as well as on epoxy primer applied surfaces. Polyester Putty HT, Light Yellow - 920-2350 PACKINK- Polyester Putty HT is used to repair deep surface defects in paint renewal and repair works. Applied on cleaned bare sheet metal, fiberglass and wooden surfaces. Rapid Putty - 565-4283 It is a rapid drying product with high filling power and very good processing and sanding properties and is used to fill the uneven parts on metal surfaces. The product is ready for application.

Primers

Car Refinish

PACKINK 4+1 Acrylic Primer (2K) - 533-7D13 It is used as an undercoat and as a filling primer particularly in car refinish and commercial vehicle painting systems. Applied on sheet metal, galvanized and old painted surfaces to give a smooth appearance to topcoats that will be applied later (synthetic ones must have been applied at least 3 months ago). It has a high filling power with easy wet and dry sanding feature. Excellent stock stability. PACKINK 5+1 Acrylic Primer 2K- 435-7D13 It is a 5+1 acrylic primer used as an undercoat and as a filling primer particularly in car refinish and commercial vehicle painting systems. Applied on sheet metal, galvanized and old painted surfaces to give a smooth appearance to topcoats that will be applied later (synthetic ones must have been applied at least 3 months ago). It has a high filling power with easy wet and dry sanding feature. Excellent stock stability. PACKINK 4+1 Acrylic Primer 2K (Express) - 533-7F13 It is used as an undercoat and as a filling primer particularly in car refinish and commercial vehicle painting systems. It is recommended to be used in express processes. Sanding should be done on the same day. Applied on sheet metal, galvanized and old painted surfaces to give a smooth appearance to topcoats that will be applied later (synthetic ones must have been applied at least 3 months ago). It is a primer with high filling power and suitable for sanding on the same day. Excellent stock stability. PACKINK 4+1 HS Primer 2K- 533-1A38 It is used as an undercoat and as a filling primer particularly in car refinish and commercial vehicle painting systems. It is a white colored primer. Applied on sheet metal, galvanized and old painted surfaces to give a smooth appearance to topcoats that will be applied later (synthetic ones must have been applied at least 3 months ago). The product has a high filling power with easy wet and dry sanding feature. High Tech 4+1 acrylic Primer - 533-7846 It is used as an undercoat and as a filling primer particularly in car refinish and commercial vehicle painting systems. Excellent resistance to solvents and severe weather conditions, with high-solid content. Provides easy wet and dry sanding. It also provides excellent coverage feature for the topcoat. Applied on sheet metal, galvanized and old painted surfaces to give a smooth appearance to topcoats that will be applied later (synthetic ones must have been applied at least 3 months ago). The product has a high filling power with high solid content and easy wet and dry sanding feature. Excellent stock stability. PACKINK 1K Primer (Gray) - 548-7568 and PACKINK Cellulosic Primer 545 Series PACKINK- 1K Primer (Gray) is used especially in car refinish painting systems. It is a primer consisting of mixture of nitro cellulosic and various binders which is used by applying at least 3 coats under the topcoat in works requiring rapid drying with a filling feature less than Acrylic 2K primers. It is easy to sand. All kinds of topcoats can be applied on it, it is particularly recommended to be used as a 118-series primer. The film formation features of PACKINK Cellulosic Primer 545 Series are excellent. Easily sanded. Has a rapid air-dry feature. Applied on old paints film to give a smooth appearance to topcoats that will be applied later (synthetic ones must have been applied at least 3 months ago). Single-Component Primer - 520-7510 When used as an anti-rust and protective primer on sheet metal surfaces, ensures surface durability against outdoor weather conditions for 6-8 months. It is used as a primer enhancing adhesion on galvanized and aluminum surfaces. HS Epoxy Primers 596-7723 Gray, 596-3A42 Green This primer with an epoxy-based binder structure is a double-component epoxy primer with features such as excellent adhesion to metal surfaces, a high-solid filling primer and forming a surface under topcoat paints. It also increases the paint adhesion to the surface and its resistance to rust and functions as an undercoat primer. PACKINK-PLAST Metallic Plastic Surface Primer - 563-7A71 It is suitable for use on all paintable plastic surfaces on vehicles. Thanks to the metal particles contained, it provides better adherence of the topcoat on the surface. It also highlights the primer applied areas on the parts. The product is ready for application. PACKINK Plastic Surface Primer, Transparent - 563-9054 and 563-7C16 It is a primer providing adhesion on paintable plastic parts on cars. The product is ready for application. PACKINK-2K Plastic Surface Primer 563-1405 White It is a double-component, filler-applied white colored product with high chemical and physical resistance, providing adhesion on paintable plastic parts on cars. PACKINK Textured Bumper Paint 563-9A07 Black, 563-7C14 Gray It is specifically used on plastic bumpers. Since it contains texture additives, it adds texture to the bumper. It is suitable for use on all plastic surfaces. It has a strong adhesion and rapid drying feature.

Topcoats

Car Refinish

PACKINK-CRYL 2K Acrylic Car Refinish Paint - 140-Series It is a double-component acrylic/isocyanate-based topcoat with gloss retention and elasticity features and high mechanical and chemical resistance developed for car refinish paints. Depending on weather conditions and the size of the application surface, it allows the system to accelerate and slow down with different hardener and thinner options. PACKINK Base Coat - 141-Series PACKINK-base is a tack-cloth wipable base coat system with high color compatibility, yielding very good results on the applied surfaces, in complete painting renewal and one-piece painting (retouching processes) when necessary with its excellent spreading and rapid drying features. Transparent acrylic varnish can be applied on it after the flash off period. Synthetic Car Refinish Paint - 118-Series This topcoat provides glossy surface and thick film layer. There is no need for paste-polishing after paint application. It is generally used for painting commercial vehicles (such as buses, trucks). Thanks to the slow evaporating solvents in its structure, it ensures that it does not damage the lower floors. There is a wrinkling risk on re-painted surfaces before complete drying occurs. One day will be sufficient to achieve assembly dry. PACKINK Cellulosic Topcoat Paint - 245-Series It is a rapidly drying cellulosic auto paint with high coverage. Its prominent features include elasticity and longlasting gloss permanence. It is a topcoat paint used in painting cars and metal surfaces. PACKINK PACKINK MIXLINE Opaque Topcoats - 648-Series They are opaque topcoat components of the High UV-resistant Car Refinish Paints mixing system, which can be prepared with the PACKINK PACKINK MIXLINE system and having high coverage, gloss ratio and spreading features. Since it is very rich in terms of component variety, it allows to prepare the color closest to the original one. Formulation can be made as Acrylic and HS systems according to the requirements. PACKINK PACKINK MIXLINE Metallic Basecoats - 649-Series They are components of Car Refinish Paints mixing system, which can be prepared with the PACKINK PACKINK MIXLINE system and having high coverage, gloss ratio and spreading features. Since it is very rich in terms of component variety, it allows to prepare the color closest to the original one. Metallic, pearl effect, crystal effects, effect additive and patch varnish are the products also included in this system.

Varnishes

Car Refinish

Universal Acrylic Varnish 2K -140-0740 Universal Acrylic Varnish is a two-component acrylic isocyanate-based varnish with high gloss retention, elasticity, mechanical and chemical resistance. The most important feature is its excellent adhesion on all basecoats. Universal Acrylic Varnish is the varnish coat of the double layer metallic paint system. It has been specifically developed for use in the car refinish market for paint, repair and renewal purposes. Rapid 2K Acrylic Varnish - 140-0754 Rapid 2K Acrylic varnish is a two-component acrylic varnish with excellent filling power, its spread, brightness and gloss retention are excellent. Since its drying rate is higher, it is recommended to use one or two parts in paint repair works. It saves time and shortens the waxing-polishing process period. Rapid 2K Acrylic Varnish is the varnish coat of the double-layer metallic paint system. High Tech 2K Acrylic Varnish - 140-0648 It is a double-component acrylic varnish with excellent filling power. A glossy product with excellent spreading and gloss retention features. It has a rapid drying and excellent adhesion feature. Has high resistance to ultraviolet rays. Economic Acrylic Varnish - 140-0A40 It is a two component acrylic varnish with high filling power. Its spread, brightness and gloss retention are excellent. Has a rapid drying and excellent adhesion feature. With its application thinner and hardener options, it allows the system to speed up or slow down depending on different weather conditions. 2K Acrylic Matt Varnish - 140-0M40-11D 2K Acrylic Matt Varnish is a two-component acrylic isocyanate-based varnish with high gloss retention, elasticity, mechanical and chemical resistance. The most important feature is its excellent adhesion on all basecoats. 2K Acrylic Matt Varnish is the varnish coat of the double-coated metallic paint system. It has an excellent stock stability. Cellulosic Auto Varnish - 440-0030 Cellulosic Auto Varnish is used by adding to the cellulosic topcoat paint. The final coat of the paint application is completed with cellulosic paint with added Cellulosic Auto Varnish. No more than 30% of this product should be added in order not to reduce the coverage power of the cellulosic topcoat and should not be applied on topcoats or metallic basecoats.

Hardeners

Car Refinish

Universal Acrylic Hardeners 871- 0535/ 0531/0565/0589 They are universal hardeners used in acrylic paints and varnishes. Considering the temperature and seasonal weather changes in the applied environment, the proper hardener should be preferred among the hardener types of SLOW, NORMAL, RAPID or EXTRA RAPID. Economical Hardener - 871-0A13 - 871- 0A73-871-0A85 They are economical universal hardeners used in acrylic paints and varnishes. Considering the temperature and seasonal weather changes in the applied environment, the proper hardener should be preferred among the hardener types of SLOW, NORMAL or RAPID. High-Tech Acrylic Hardener - 871-0548, 871-0A81 It is a high solid hardener used in acrylic paints and acrylic varnishes. The gloss, surface smoothness and durability it gives to the topcoat is higher compared to other hardeners. The drying rate is formulated to give yield results at any temperature. Maxi Primer Hardener - 871-0A90 Maxi Primer Hardener- 871-0A90. Epoxy Hardeners - 871- 9157, 871-0A99 It is a hardener used with epoxy-based primers. 118 Synthetic Paint Hardener - 871-9118 It is a synthetic-based hardener accelerating the drying time in 118-series topcoats.

Thinners

Car Refinish

Universal Acrylic Thinners - 803-9316, 803-9391, 803-9350) It is used for thinning the prepared acrylic primer in the proportions specified in the specifications of topcoats and varnishes. The primer helps topcoat and varnishes to adhere to spread on the surface where they are applied and helps a glossy surface to be formed. Considering the temperature and seasonal weather changes in the applied environment, the proper thinner should be preferred among the thinner types of SLOW, NORMAL, RAPID or EXTRA RAPID. Cellulosic Thinners - 803-9304, 803-9900 It is used for thinning the cellulosic paint systems at the ratios defined in their specifications. It can furthermore be used for cleaning to remove dirt and grease from all surfaces other than plastic. Patch Thinner - 803-0083 It is used for bonding old painted/varnished surfaces with newly applied paint/varnish on the transition areas of patches after topcoat paints have been applied. It prevents tearing of the paint patch area during paste polishing processes. Surface Cleaning Thinner - 822-9305 It is used to remove dirt, oil, rust and silicon residues from the surface in surface preparation and painting processes. Used on metal, sheet metal and galvanized surfaces. Plastic Surface Cleaning Thinner - 822-9330 It is used to remove dirt, oil, rust and silicon residues from the surface in painting processes on plastic surfaces. Epoxy Thinner - 803-9115 It is used for thinning the the epoxy paint systems at the ratios defined in their specifications. Basecoat Thinner - 803-9B25 Used to thinning the 141-series basecoats. Synthetic Topcoat Thinner - 822-9218 Synthetic Topcoat Thinner is used for thinning 118-Series Synthetic Topcoats. Basecoat Thinner is used for thinning 141-Series Basecoats. Super Retarder - 803-9800 It is a thinner used in order to provide a better spread by delaying the drying time in very hot weather during summer.

Auxiliary Products

Car Refinish

Anti-Silicone - 879-9858 It is used in topcoat and varnish applications to increase the spread on the surface and prevent paint defects (craterization) on the surface caused by the silicone-containing materials in the environment. Should be added to the prepared material with a proportion not exceeding 3%. Extra Accelerator - 870-9885 It is an auxiliary product used in primer, topcoat and varnish applications to prevent late drying due to temperature changes in the environment and to speed up the drying time. Universal Paste - 841-0602 It is used to remove tar, rust, dirt and fine scratches on the topcoat. Suitable for manual and machine application. Resin-based Undercoat Paint - Grainy Paint - 200-Series It is a product with high filling power and textured pattern appearance compatible with original parts, with high adhesion capacity, providing sound insulation and allowing topcoat application on it. Thanks to its packaging feature, it is ready to be directly applied with a spray gun. Paint Remover - 851-0830 Removes the paste, primer and topcoat until the surface material is reached and makes makes the surface available for a new application. Applied with a brush on the surface in a thin single coat. Paint is removed by scraping with a spatula after allowing for about 45 to 60 minutes. Hand and eye contact should be avoided due to its content.

Structural Steel

Protective Coatings

Acrylic Polyurethane Topcoat C61 Series PACKINK-POL EHS TOPCOAT It is a double-component, high solid polyurethane paint able to be cured with aliphatic isocyanate. Has a semi-matt appearance. Has excellent color and gloss retention. Dries rapidly. Easy to repair. Has a low VOC value. Leed compliant and meets VOC < 250g/L value as per the GC03 standard. Used in construction and factory steels as well as in stadiums, shopping malls, green buildings, warehouses, hospitals, etc. Acrylic Polyurethane Topcoat C71 Series PACKINK-POL HS TOPCOAT It is a double-component polyurethane paint able to be cured with aliphatic isocyanate. Has a semi-matt appearance. Has excellent color and gloss retention. Dries rapidly. Easy to repair. Used in construction and factory steels as well as in stadiums, shopping malls, green buildings, warehouses, hospitals, etc. Alkyd Primer P80 Series PACKINK-KYD HB PRIMER It is a modified alkyd resin based, high solid, single-component, rapid drying primer containing anticorrosive pigment zinc phosphate. Alkyd Topcoat C80 PACKINK-KYD HS TOPCOAT It is a modified alkyd resin based, one-component, high solid, rapid-drying paint with a semi-matt appearance. Has a semi-matt appearance. Easy to repair. Used in crane manufacturing industry, petrochemical and gas plants, cement and paper mill steels and mines. Zinc Rich Epoxy Primer P08 Series PACKINK-POX ZINC PRIMER-08 It is a two-component epoxy primer with high zinc content. Developed for high corrosive environments. Meets ISO 12944-5 and SSPC Paint 20, Level 1, Type II requirements (contains minimum 80% zinc). Forms a superior protective system together with other paint systems applied on it. Used in construction steels, stadiums, shopping malls, industrial plants, green buildings, warehouses, hospitals, etc. Epoxy Midcoat R03 Series PACKINK-POX HB COAT-F It is a double-component, high solid epoxy primer/midcoat containing anticorrosive pigment zinc phosphate. Has high sag resistance and easy-to-repair feature. Dries rapidly. Has a low VOC value. Leed compliant and meets VOC < 250g/L value as per the GC03 standard. Used in construction and factory steels as well as in stadiums, shopping malls, green buildings, warehouses, hospitals, etc. Epoxy Primer P10 Series PACKINK-POX HB Primer It is a double-component high solid epoxy primer containing anticorrosive pigment zinc phosphate. Developed for high corrosive environments. Has a low VOC value and driesrapidly. Adheres to steel and galvanized steel. Leed compliant and meets VOC < 250g/L value as per the GC03 standard. Used in construction and factory steels as well as in stadiums, shopping malls, green buildings, warehouses, hospitals, etc. Epoxy Midcoat C10 Series PACKINK-POX HS TOPCOAT It is a double-component, high solid epoxy paint. Has a semi-matt appearance. Dries rapidly. Has a low VOC value. Leed compliant and meets VOC < 250g/L value as per the GC03 standard. Used in construction and factory steels as well as in stadiums, shopping malls, green buildings, warehouses, hospitals, etc.

Industrial Facilities

Protective Coatings

Acrylic Polyurethane Topcoat C61 Series PACKINK-POL EHS TOPCOAT It is a double-component, high solid polyurethane paint able to be cured with aliphatic isocyanate. Has a semi-matt appearance. Has excellent color and gloss retention. Dries rapidly. Easy to repair. Has a low VOC value. Leed compliant and meets VOC < 250g/L value as per the GC03 standard. Used in construction and factory steels as well as in stadiums, shopping malls, green buildings, warehouses, hospitals, etc. Acrylic Polyurethane Topcoat C71 Series PACKINK-POL HS TOPCOAT It is a double-component polyurethane paint able to be cured with aliphatic isocyanate. Has a semi-matt appearance. Has excellent color and gloss retention. Dries rapidly. Easy to repair. Used in construction and factory steels as well as in stadiums, shopping malls, green buildings, warehouses, hospitals, etc. Alkyd Primer P80 Series PACKINK-KYD HB PRIMER It is a modified alkyd resin based, high solid, single-component, rapid drying primer containing anticorrosive pigment zinc phosphate. Alkyd Topcoat C80 PACKINK-KYD HS TOPCOAT It is a modified alkyd resin based, one-component, high solid, rapid-drying paint with a semi-matt appearance. Has a semi-matt appearance. Easy to repair. Used in crane manufacturing industry, petrochemical and gas plants, cement and paper mill steels and mines. Zinc Rich Epoxy Primer P08 Series PACKINK-POX ZINC PRIMER-08 It is a two-component epoxy primer with high zinc content. Developed for high corrosive environments. Meets ISO 12944-5 and SSPC Paint 20, Level 1, Type II requirements (contains minimum 80% zinc). Forms a superior protective system together with other paint systems applied on it. Used in construction steels, stadiums, shopping malls, industrial plants, green buildings, warehouses, hospitals, etc. Epoxy Midcoat R03 Series PACKINK-POX HB COAT-F It is a double-component, high solid epoxy primer/midcoat containing anticorrosive pigment zinc phosphate. Has high sag resistance and easy-to-repair feature. Dries rapidly. Has a low VOC value. Leed compliant and meets VOC < 250g/L value as per the GC03 standard. Used in construction and factory steels as well as in stadiums, shopping malls, green buildings, warehouses, hospitals, etc. Epoxy Midcoat R71 Series PACKINK-POX MIDCOAT It is a two component high solid epoxy primer/midcoat paint containing anticorrosive pigment zinc phosphate. Can be applied in more than one thick coat. Has a low VOC value. Used on the exterior surfaces of vertical, horizontal and sphere-shaped storage tanks and transport tankers. Epoxy Primer P10 Series PACKINK-POX HB Primer It is a double-component high solid epoxy primer containing anticorrosive pigment zinc phosphate. Developed for high corrosive environments. Has a low VOC value and driesrapidly. Adheres to steel and galvanized steel. Leed compliant and meets VOC < 250g/L value as per the GC03 standard. Used in construction and factory steels as well as in stadiums, shopping malls, green buildings, warehouses, hospitals, etc. Epoxy Midcoat C10 Series PACKINK-POX HS TOPCOAT It is a double-component, high solid epoxy paint. Has a semi-matt appearance. Dries rapidly. Has a low VOC value. Leed compliant and meets VOC < 250g/L value as per the GC03 standard. Used in construction and factory steels as well as in stadiums, shopping malls, green buildings, warehouses, hospitals, etc. Surface Tolerant Epoxy R72 Series PACKINK-POX MIDCOAT-T It is a two-component, high solid, surface tolerant epoxy paint containing anticorrosive pigment zinc phosphate. Can be applied in very thick coats. Has a low VOC value. Used on the exterior surfaces of vertical, horizontal and sphere-shaped storage tanks and transport tankers. Provides high protection in seashore, over-sea and undersea structures. Used in bridges, viaducts, tunnels, subways, piers, ports and railway steels.

Storage tanks and Transport Tankers

Protective Coatings

Acrylic Polyurethane Topcoat C61 Series PACKINK-POL EHS TOPCOAT It is a double-component, high solid polyurethane paint able to be cured with aliphatic isocyanate. Has a semi-matt appearance. Has excellent color and gloss retention. Dries rapidly. Easy to repair. Has a low VOC value. Leed compliant and meets VOC < 250g/L value as per the GC03 standard. Used in construction and factory steels as well as in stadiums, shopping malls, green buildings, warehouses, hospitals, etc. Acrylic Polyurethane Topcoat C71 Series PACKINK-POL HS TOPCOAT It is a double-component polyurethane paint able to be cured with aliphatic isocyanate. Has a semi-matt appearance. Has excellent color and gloss retention. Dries rapidly. Easy to repair. Used in construction and factory steels as well as in stadiums, shopping malls, green buildings, warehouses, hospitals, etc. C90 PACKINK-HEAT TOPCOAT 600 It is a one component, silicone resin based topcoat paint resistant to heat. Resistant to a dry temperature of 600°C. C92 PACKINK-HEAT TOPCOAT 250 It is a one component, acrylic modified silicone resin-based topcoat paint resistant to heat. Resistant to a dry temperature of 250°C. Used on hot exterior surfaces of places such as steel construction equipment, hot pipes, chimneys, exhausts, furnaces and similar. Zinc Rich Epoxy Primer P08 Series PACKINK-POX ZINC PRIMER-08 It is a two-component epoxy primer with high zinc content. Developed for high corrosive environments. Meets ISO 12944-5 and SSPC Paint 20, Level 1, Type II requirements (contains minimum 80% zinc). Forms a superior protective system together with other paint systems applied on it. Used in construction steels, stadiums, shopping malls, industrial plants, green buildings, warehouses, hospitals, etc. Epoxy Midcoat R71 Series PACKINK-POX MIDCOAT It is a two component high solid epoxy primer/midcoat paint containing anticorrosive pigment zinc phosphate. Can be applied in more than one thick coat. Has a low VOC value. Used on the exterior surfaces of vertical, horizontal and sphere-shaped storage tanks and transport tankers. Hygienic Epoxy C21 Series PACKINK-POX PTW, WRAS Certified It is a two-component, solvent-free epoxy paint. Compliant with drinking water. Resistant to fresh water, sea water and crude oil. Does not contain VOC. Does not contain benzyl alcohol and nonyl phenol. Used on interior surfaces of storage tanks and transport tankers. Its approved with drinking water has been certified by WRAS (England) as per the BS 6920 standard. Approved with food contact has been tested by Intertek (England) as per the FDA Part 21 CFR 175.300 standard. Heat Resistant Silicone Paints - P90 Series PACKINK-HEAT ZINC PRIMER It is a one component, silicone resin-based primer containing high ratio of zinc and resistant to a dry temperature of 400°C. Novalac Epoxy C20 Series PACKINK-POX PHENOLIC, in conformity with MIL PRF4556-F It is a double-component, high solid phenolic (novolac) single-coat epoxy paint. It is resistant to chemicals (fuel, solvent, etc.). Has a low VOC value. Resistant to hot water. It is recommended to be used on steel and concrete surfaces. Used on interior surfaces of fuel storage tanks and transport tankers. Surface Tolerant Epoxy R72 Series PACKINK-POX MIDCOAT-T It is a two-component, high solid, surface tolerant epoxy paint containing anticorrosive pigment zinc phosphate. Can be applied in very thick coats. Has a low VOC value. Used on the exterior surfaces of vertical, horizontal and sphere-shaped storage tanks and transport tankers. Provides high protection in seashore, over-sea and undersea structures. Used in bridges, viaducts, tunnels, subways, piers, ports and railway steels.

Bridges and infrastructure

Protective Coatings

Acrylic Polyurethane Topcoat C61 Series PACKINK-POL EHS TOPCOAT It is a double-component, high solid polyurethane paint able to be cured with aliphatic isocyanate. Has a semi-matt appearance. Has excellent color and gloss retention. Dries rapidly. Easy to repair. Has a low VOC value. Leed compliant and meets VOC < 250g/L value as per the GC03 standard. Used in construction and factory steels as well as in stadiums, shopping malls, green buildings, warehouses, hospitals, etc. Acrylic Polyurethane Topcoat C71 Series PACKINK-POL HS TOPCOAT It is a double-component polyurethane paint able to be cured with aliphatic isocyanate. Has a semi-matt appearance. Has excellent color and gloss retention. Dries rapidly. Easy to repair. Used in construction and factory steels as well as in stadiums, shopping malls, green buildings, warehouses, hospitals, etc. Glass Flake-Reinforced Epoxy R30 Series PACKINK-POX GF COAT It is a two-component, high solid one-coat epoxy one coat paint reinforced with glass flakes. Has high mechanical features. Has perfect abrasion resistance. Has a very high chemical and water resistance. Has a low VOC value. Used on the exterior surfaces of spiral steel pipes. Used in underground and above ground pipelines. Zinc Rich Epoxy Primer P08 Series PACKINK-POX ZINC PRIMER-08 It is a two-component epoxy primer with high zinc content. Developed for high corrosive environments. Meets ISO 12944-5 and SSPC Paint 20, Level 1, Type II requirements (contains minimum 80% zinc). Forms a superior protective system together with other paint systems applied on it. Used in construction steels, stadiums, shopping malls, industrial plants, green buildings, warehouses, hospitals, etc. Epoxy Midcoat R71 Series PACKINK-POX MIDCOAT It is a two component high solid epoxy primer/midcoat paint containing anticorrosive pigment zinc phosphate. Can be applied in more than one thick coat. Has a low VOC value. Used on the exterior surfaces of vertical, horizontal and sphere-shaped storage tanks and transport tankers. Epoxy Primer R01 Series PACKINK-POX HB COAT It is a two-component, high solid, epoxy primer/midcoat paint containing anticorrosive pigment zinc phosphate. Developed for high-corrosive environments. Has a low VOC value. Used in bridges, viaducts, tunnels, subways, piers, ports and railway steels. Epoxy MIOX Midcoat R10 Series PACKINK-POX MIDCOAT It is a two-component, high solid epoxy paint containing anticorrosive micaceous iron oxide powder and zinc phosphate. Has a very high chemical and water resistance. Has a low VOC value. Can be applied in a one coat. Provides high protection in seashore, over-sea and undersea structures. Used in bridges, viaducts, tunnels, subways, piers, ports and railway steels. Surface Tolerant Epoxy R72 Series PACKINK-POX MIDCOAT-T It is a two-component, high solid, surface tolerant epoxy paint containing anticorrosive pigment zinc phosphate. Can be applied in very thick coats. Has a low VOC value. Used on the exterior surfaces of vertical, horizontal and sphere-shaped storage tanks and transport tankers. Provides high protection in seashore, over-sea and undersea structures. Used in bridges, viaducts, tunnels, subways, piers, ports and railway steels.

Piers and Ports

Protective Coatings

Acrylic Polyurethane Topcoat C61 Series PACKINK-POL EHS TOPCOAT It is a double-component, high solid polyurethane paint able to be cured with aliphatic isocyanate. Has a semi-matt appearance. Has excellent color and gloss retention. Dries rapidly. Easy to repair. Has a low VOC value. Leed compliant and meets VOC < 250g/L value as per the GC03 standard. Used in construction and factory steels as well as in stadiums, shopping malls, green buildings, warehouses, hospitals, etc. Acrylic Polyurethane Topcoat C71 Series PACKINK-POL HS TOPCOAT It is a double-component polyurethane paint able to be cured with aliphatic isocyanate. Has a semi-matt appearance. Has excellent color and gloss retention. Dries rapidly. Easy to repair. Used in construction and factory steels as well as in stadiums, shopping malls, green buildings, warehouses, hospitals, etc. Glass Flake-Reinforced Epoxy R30 Series PACKINK-POX GF COAT It is a two-component, high solid one-coat epoxy one coat paint reinforced with glass flakes. Has high mechanical features. Has perfect abrasion resistance. Has a very high chemical and water resistance. Has a low VOC value. Used on the exterior surfaces of spiral steel pipes. Used in underground and above ground pipelines. Zinc Rich Epoxy Primer P08 Series PACKINK-POX ZINC PRIMER-08 It is a two-component epoxy primer with high zinc content. Developed for high corrosive environments. Meets ISO 12944-5 and SSPC Paint 20, Level 1, Type II requirements (contains minimum 80% zinc). Forms a superior protective system together with other paint systems applied on it. Used in construction steels, stadiums, shopping malls, industrial plants, green buildings, warehouses, hospitals, etc. Epoxy Midcoat R71 Series PACKINK-POX MIDCOAT It is a two component high solid epoxy primer/midcoat paint containing anticorrosive pigment zinc phosphate. Can be applied in more than one thick coat. Has a low VOC value. Used on the exterior surfaces of vertical, horizontal and sphere-shaped storage tanks and transport tankers. Epoxy Primer R01 Series PACKINK-POX HB COAT It is a two-component, high solid, epoxy primer/midcoat paint containing anticorrosive pigment zinc phosphate. Developed for high-corrosive environments. Has a low VOC value. Used in bridges, viaducts, tunnels, subways, piers, ports and railway steels. Epoxy MIOX Midcoat R10 Series PACKINK-POX MIDCOAT It is a two-component, high solid epoxy paint containing anticorrosive micaceous iron oxide powder and zinc phosphate. Has a very high chemical and water resistance. Has a low VOC value. Can be applied in a one coat. Provides high protection in seashore, over-sea and undersea structures. Used in bridges, viaducts, tunnels, subways, piers, ports and railway steels. Surface Tolerant Epoxy R72 Series PACKINK-POX MIDCOAT-T It is a two-component, high solid, surface tolerant epoxy paint containing anticorrosive pigment zinc phosphate. Can be applied in very thick coats. Has a low VOC value. Used on the exterior surfaces of vertical, horizontal and sphere-shaped storage tanks and transport tankers. Provides high protection in seashore, over-sea and undersea structures. Used in bridges, viaducts, tunnels, subways, piers, ports and railway steels.

Pipes

Protective Coatings

Acrylic Polyurethane Topcoat C61 Series PACKINK-POL EHS TOPCOAT It is a double-component, high solid polyurethane paint able to be cured with aliphatic isocyanate. Has a semi-matt appearance. Has excellent color and gloss retention. Dries rapidly. Easy to repair. Has a low VOC value. Leed compliant and meets VOC < 250g/L value as per the GC03 standard. Used in construction and factory steels as well as in stadiums, shopping malls, green buildings, warehouses, hospitals, etc. Acrylic Polyurethane Topcoat C71 Series PACKINK-POL HS TOPCOAT It is a double-component polyurethane paint able to be cured with aliphatic isocyanate. Has a semi-matt appearance. Has excellent color and gloss retention. Dries rapidly. Easy to repair. Used in construction and factory steels as well as in stadiums, shopping malls, green buildings, warehouses, hospitals, etc. C90 PACKINK-HEAT TOPCOAT 600 It is a one component, silicone resin based topcoat paint resistant to heat. Resistant to a dry temperature of 600°C. C92 PACKINK-HEAT TOPCOAT 250 It is a one component, acrylic modified silicone resin-based topcoat paint resistant to heat. Resistant to a dry temperature of 250°C. Used on hot exterior surfaces of places such as steel construction equipment, hot pipes, chimneys, exhausts, furnaces and similar. Glass Flake-Reinforced Epoxy R30 Series PACKINK-POX GF COAT It is a two-component, high solid one-coat epoxy one coat paint reinforced with glass flakes. Has high mechanical features. Has perfect abrasion resistance. Has a very high chemical and water resistance. Has a low VOC value. Used on the exterior surfaces of spiral steel pipes. Used in underground and above ground pipelines. Epoxy Midcoat R71 Series PACKINK-POX MIDCOAT It is a two component high solid epoxy primer/midcoat paint containing anticorrosive pigment zinc phosphate. Can be applied in more than one thick coat. Has a low VOC value. Used on the exterior surfaces of vertical, horizontal and sphere-shaped storage tanks and transport tankers. Hygienic Epoxy C21 Series PACKINK-POX PTW, WRAS Certified It is a two-component, solvent-free epoxy paint. Compliant with drinking water. Resistant to fresh water, sea water and crude oil. Does not contain VOC. Does not contain benzyl alcohol and nonyl phenol. Used on interior surfaces of storage tanks and transport tankers. Its approved with drinking water has been certified by WRAS (England) as per the BS 6920 standard. Approved with food contact has been tested by Intertek (England) as per the FDA Part 21 CFR 175.300 standard. Heat Resistant Silicone Paints - P90 Series PACKINK-HEAT ZINC PRIMER It is a one component, silicone resin-based primer containing high ratio of zinc and resistant to a dry temperature of 400°C. Novalac Epoxy C20 Series PACKINK-POX PHENOLIC, in conformity with MIL PRF4556-F It is a double-component, high solid phenolic (novolac) single-coat epoxy paint. It is resistant to chemicals (fuel, solvent, etc.). Has a low VOC value. Resistant to hot water. It is recommended to be used on steel and concrete surfaces. Used on interior surfaces of fuel storage tanks and transport tankers. Surface Tolerant Epoxy R72 Series PACKINK-POX MIDCOAT-T It is a two-component, high solid, surface tolerant epoxy paint containing anticorrosive pigment zinc phosphate. Can be applied in very thick coats. Has a low VOC value. Used on the exterior surfaces of vertical, horizontal and sphere-shaped storage tanks and transport tankers. Provides high protection in seashore, over-sea and undersea structures. Used in bridges, viaducts, tunnels, subways, piers, ports and railway steels.

Energy

Protective Coatings

Acrylic Polyurethane Topcoat C61 Series PACKINK-POL EHS TOPCOAT It is a double-component, high solid polyurethane paint able to be cured with aliphatic isocyanate. Has a semi-matt appearance. Has excellent color and gloss retention. Dries rapidly. Easy to repair. Has a low VOC value. Leed compliant and meets VOC < 250g/L value as per the GC03 standard. Used in construction and factory steels as well as in stadiums, shopping malls, green buildings, warehouses, hospitals, etc. Acrylic Polyurethane Topcoat C71 Series PACKINK-POL HS TOPCOAT It is a double-component polyurethane paint able to be cured with aliphatic isocyanate. Has a semi-matt appearance. Has excellent color and gloss retention. Dries rapidly. Easy to repair. Used in construction and factory steels as well as in stadiums, shopping malls, green buildings, warehouses, hospitals, etc. Alkyd Primer P80 Series PACKINK-KYD HB PRIMER It is a modified alkyd resin based, high solid, single-component, rapid drying primer containing anticorrosive pigment zinc phosphate. Alkyd Topcoat C80 PACKINK-KYD HS TOPCOAT It is a modified alkyd resin based, one-component, high solid, rapid-drying paint with a semi-matt appearance. Has a semi-matt appearance. Easy to repair. Used in crane manufacturing industry, petrochemical and gas plants, cement and paper mill steels and mines. Zinc Rich Epoxy Primer P08 Series PACKINK-POX ZINC PRIMER-08 It is a two-component epoxy primer with high zinc content. Developed for high corrosive environments. Meets ISO 12944-5 and SSPC Paint 20, Level 1, Type II requirements (contains minimum 80% zinc). Forms a superior protective system together with other paint systems applied on it. Used in construction steels, stadiums, shopping malls, industrial plants, green buildings, warehouses, hospitals, etc. Epoxy Midcoat R03 Series PACKINK-POX HB COAT-F It is a double-component, high solid epoxy primer/midcoat containing anticorrosive pigment zinc phosphate. Has high sag resistance and easy-to-repair feature. Dries rapidly. Has a low VOC value. Leed compliant and meets VOC < 250g/L value as per the GC03 standard. Used in construction and factory steels as well as in stadiums, shopping malls, green buildings, warehouses, hospitals, etc. Epoxy Midcoat R71 Series PACKINK-POX MIDCOAT It is a two component high solid epoxy primer/midcoat paint containing anticorrosive pigment zinc phosphate. Can be applied in more than one thick coat. Has a low VOC value. Used on the exterior surfaces of vertical, horizontal and sphere-shaped storage tanks and transport tankers. Epoxy Primer P10 Series PACKINK-POX HB Primer It is a double-component high solid epoxy primer containing anticorrosive pigment zinc phosphate. Developed for high corrosive environments. Has a low VOC value and driesrapidly. Adheres to steel and galvanized steel. Leed compliant and meets VOC < 250g/L value as per the GC03 standard. Used in construction and factory steels as well as in stadiums, shopping malls, green buildings, warehouses, hospitals, etc. Epoxy Midcoat C10 Series PACKINK-POX HS TOPCOAT It is a double-component, high solid epoxy paint. Has a semi-matt appearance. Dries rapidly. Has a low VOC value. Leed compliant and meets VOC < 250g/L value as per the GC03 standard. Used in construction and factory steels as well as in stadiums, shopping malls, green buildings, warehouses, hospitals, etc. Surface Tolerant Epoxy R72 Series PACKINK-POX MIDCOAT-T It is a two-component, high solid, surface tolerant epoxy paint containing anticorrosive pigment zinc phosphate. Can be applied in very thick coats. Has a low VOC value. Used on the exterior surfaces of vertical, horizontal and sphere-shaped storage tanks and transport tankers. Provides high protection in seashore, over-sea and undersea structures. Used in bridges, viaducts, tunnels, subways, piers, ports and railway steels.

Cranes

Protective Coatings

Acrylic Polyurethane Topcoat C61 Series PACKINK-POL EHS TOPCOAT It is a double-component, high solid polyurethane paint able to be cured with aliphatic isocyanate. Has a semi-matt appearance. Has excellent color and gloss retention. Dries rapidly. Easy to repair. Has a low VOC value. Leed compliant and meets VOC < 250g/L value as per the GC03 standard. Used in construction and factory steels as well as in stadiums, shopping malls, green buildings, warehouses, hospitals, etc. Acrylic Polyurethane Topcoat C71 Series PACKINK-POL HS TOPCOAT It is a double-component polyurethane paint able to be cured with aliphatic isocyanate. Has a semi-matt appearance. Has excellent color and gloss retention. Dries rapidly. Easy to repair. Used in construction and factory steels as well as in stadiums, shopping malls, green buildings, warehouses, hospitals, etc. Alkyd Primer P80 Series PACKINK-KYD HB PRIMER It is a modified alkyd resin based, high solid, single-component, rapid drying primer containing anticorrosive pigment zinc phosphate. Alkyd Topcoat C80 PACKINK-KYD HS TOPCOAT It is a modified alkyd resin based, one-component, high solid, rapid-drying paint with a semi-matt appearance. Has a semi-matt appearance. Easy to repair. Used in crane manufacturing industry, petrochemical and gas plants, cement and paper mill steels and mines. Zinc Rich Epoxy Primer P08 Series PACKINK-POX ZINC PRIMER-08 It is a two-component epoxy primer with high zinc content. Developed for high corrosive environments. Meets ISO 12944-5 and SSPC Paint 20, Level 1, Type II requirements (contains minimum 80% zinc). Forms a superior protective system together with other paint systems applied on it. Used in construction steels, stadiums, shopping malls, industrial plants, green buildings, warehouses, hospitals, etc. Epoxy Midcoat R03 Series PACKINK-POX HB COAT-F It is a double-component, high solid epoxy primer/midcoat containing anticorrosive pigment zinc phosphate. Has high sag resistance and easy-to-repair feature. Dries rapidly. Has a low VOC value. Leed compliant and meets VOC < 250g/L value as per the GC03 standard. Used in construction and factory steels as well as in stadiums, shopping malls, green buildings, warehouses, hospitals, etc. Epoxy Midcoat R71 Series PACKINK-POX MIDCOAT It is a two component high solid epoxy primer/midcoat paint containing anticorrosive pigment zinc phosphate. Can be applied in more than one thick coat. Has a low VOC value. Used on the exterior surfaces of vertical, horizontal and sphere-shaped storage tanks and transport tankers. Epoxy Primer P10 Series PACKINK-POX HB Primer It is a double-component high solid epoxy primer containing anticorrosive pigment zinc phosphate. Developed for high corrosive environments. Has a low VOC value and driesrapidly. Adheres to steel and galvanized steel. Leed compliant and meets VOC < 250g/L value as per the GC03 standard. Used in construction and factory steels as well as in stadiums, shopping malls, green buildings, warehouses, hospitals, etc. Epoxy Midcoat C10 Series PACKINK-POX HS TOPCOAT It is a double-component, high solid epoxy paint. Has a semi-matt appearance. Dries rapidly. Has a low VOC value. Leed compliant and meets VOC < 250g/L value as per the GC03 standard. Used in construction and factory steels as well as in stadiums, shopping malls, green buildings, warehouses, hospitals, etc. Surface Tolerant Epoxy R72 Series PACKINK-POX MIDCOAT-T It is a two-component, high solid, surface tolerant epoxy paint containing anticorrosive pigment zinc phosphate. Can be applied in very thick coats. Has a low VOC value. Used on the exterior surfaces of vertical, horizontal and sphere-shaped storage tanks and transport tankers. Provides high protection in seashore, over-sea and undersea structures. Used in bridges, viaducts, tunnels, subways, piers, ports and railway steels.

Aluminum Surfaces

Coil Coatings

BAF Series (Non-Chromate Polyester Primer) High performance non-chromate polyester primer suitable for outdoor use and on white goods. Applied to pre-treated aluminum surfaces. It provides high moisture and corrosion resistance. Different designs are available for different needs and requests. BAP Series (Polyurethane Primer) High performance non-chromate polyurethane primer suitable for outdoor use and on white goods. Applied to pre-treated aluminum surfaces. Provides high flexibility besides its high moisture and corrosion resistance. Different designs are available for different needs and requests. BBE Series (Epoxy Backcoat) PACKINK- backcoat paints offer protection on the back side of painted metal and the ability to adhere to polyurethane foam and other insulation materials. In addition to the standard backcoat products, we also have colored transparent backcoat products for the Aluminum Industry. Epoxy Backcoats perform excellent adhesion on PU foams. BPS Series (Polyurethane Topcoats) PACKINK- polyurethane topcoats offer high flexibility features without compromising hardness thanks to their special resin designs. These polyurethane topcoats are often produced by combining with polyamide or acrylic beads to form a textured finished surface. By this means, a very high scratch resistance is achieved. Textured PUR topcoats are offered for use especially in areas such as window and door blinds and suspended ceilings. BT4 Series (High Resistance Polyester Topcoat) These are high-resistant polyester topcoats providing resistance at RUV4 level according to EN 10.169 and used in areas where color and gloss durability are important. BT5 Series (Flexible Polyester Topcoat) Designed in accordance with high flexibility expectations, BT5 series find favor in the aluminum industry. BV2 Series (PVDF Topcoats) PVDF topcoats containing polyvinylidene fluoride (PVDF) resin based on carbon-fluorine chemistry are particularly preferred in prestigious buildings thanks to their outstanding durability features on exterior surfaces.

Galvanized Surfaces

Coil Coatings

BAF Series (Galvanized Special Primers) High performance non-chromate polyester primer suitable for outdoor use. Applied to pre-treated galvanized steel surfaces. Provides high moisture and corrosion resistance. BBP Series (Backcoat - For Galvanized Surfaces) PACKINK- backcoat paints offer protection on the back side of painted metal and the ability to adhere to polyurethane foam and other insulation materials. We have grained backcoat products to be applied on the backside of galvanized metal where wrinkle topcoats are applied to help prevent coil collapse. BBP/BBE Series (Backcoat) PACKINK- backcoat paints offer protection on the back side of painted metal and the ability to adhere to polyurethane foam and other insulation materials. We have grained backcoat products to be applied on the backside of galvanized metal where wrinkle topcoats are applied to help prevent coil collapse. The level of Epoxy Backcoats becoming PU Foams is excellent. BT1-Series Polyester Topcoat The semi-matt polyester topcoat suitable for outdoor use is applied on pre-treated and primed galvanized steel. They are the most preferred products in the market thanks to their flexibility and resistance features. BT4 Series (High Resistance Polyester Topcoat) These are high-resistant polyester topcoats providing resistance at RUV4 level according to EN 10.169 and used in areas where color and gloss durability are important. BT5 Series (Flexible Polyester Topcoat) Thanks to their high flexibility feature, these polyester topcoats are used in environments where day and night temperature differences are very high. BTL and BTH Series Polyester topcoats are designed as BTL (low gloss) and BTH (high gloss) for different gloss level demands. They are also designed as a flexible system in accordance with the demand. BTR Series Wrinkle They are special polyester topcoats used on roof panels, providing a wrinkled surface pattern.

Antifouling Paints

Transocean

Transocean Armada It is a hydrolyzed silyl acrylate resin based, single-component, solvent-free antifouling paint containing di-copper oxide and biocide. Thanks to its self polishing feature, it provides smoothness on the submerged parts of the ship by preventing contamination during the specified period. It is used on the submerged parts of the ship for new construction and maintenance processes. Provides high performance in ships with low speed and low navigational activity. Resin and tin free. Durability extends to 60 months. Complies with IMO Antifouling system convention (AFS/CONF/26). Transocean Cleanship It is a tin-free, hybrid resin-based antifouling paint with hydrolyzing polishing features containing biocide mixtures. It has a self-wear feature thanks to the balanced mixtures of hydrophobic and hydrophilic resins. This mechanism provides leaching control in water and allows easy repainting process after service life. The product is suitable for the development of long-lasting systems up to 60 months. Complies with IMO Antifouling system convention (AFS/CONF/26). Transocean Optima It is a tin-free, self-wearing antifouling paint containing biocide mixtures. Can be applied with all Transocean anticorrosive systems. The product is suitable for the development of long-life systems up to 36 months. Complies with IMO Antifouling system convention (AFS/CONF/26).

Primers

Transocean

Transogard Primer Transogard primer is a high build alkyd primer pigmented with non-toxic pigments for an excellent protection of steel structures against corrosion in industrial and marine environments. The product offers good levelling properties and adheres well on powertool prepared substrates. It can be recoated with Transunilac and Transacryl finishes and some cases with two-pack coating systems. Not suitable for constant immersion or recoating of zinc primed steel. When combined with Transunilac Finish, Transogard Primer has low spread of flame properties. Transoprime Provides high resistance to sea water. Can be used on surfaces with little surface cleaning. Transoweld Primer 1.56 It is an ethyl silicate shop primer which has an excellent corrosion resistance drying rapidly. It is a very durable ethyl silicate shop primer that provides sufficient corrosion resistance and does not slow down the welding speed thanks to the zinc powder contained. The product provides heat resistance with the formation of small amounts of zinc salts. Has DNV-GL Type Approval Certificate. An approved shop primer for IMO-PSPC systems for TAK00000G9 crude oil and ballast tanks. Transozinc Epoxy primer 1.75 The first step in long-lasting paint systems to be used on new buildings is to apply a primer rich in zinc content. When exposed to natural conditions, zinc reacts to form an insoluble layer that will protect steel against corrosion. Zinc powder is typically distributed in the epoxy resin or silicate resin matrix. Zinc Silicate Paint provides better corrosion protection compared to Zinc Epoxy Primer; however, application, surface preparation use of Zinc Epoxy Primers are generally easier. Transozinc Epoxy Primer is an excellent epoxy primer with a high content of zinc and is used for offshore and land applications. Transpoxy Barrier FF Provides high resistance to sea water. Can be used on surfaces with little surface cleaning. It can be used up to -5°C. Even though it can be applied throughout the year, there are special respective versions for winter and summer to provide better performance. Transpoxy Barrier is an IMO-PSPC primer that can be applied in all ship areas. Transpoxy Barrier is also very suitable as a maintenance/retouching primer. Adheres well to the old paint system, which has been accurately prepared and cleaned with a high-pressure water jet. Transpoxy Masterbond BT Consists of epoxies with high solid proportions for heavy duty performance. It meets the VOC standards and reduces emissions with the solid content of over 80%. Thanks to its good wetting and adhesion features, Transpoxy Masterbond is quite suitable as a surface tolerant sealant for repair projects as well as for new construction projects. Furthermore, besides having a good chemical resistance, it meets the jet fuel storage requirements according to MIL-PRF 4556 F. Transpoxy Unicote It is an epoxy primer with very high anti-corrosive features. It is a versatile epoxy polyamide primer that can build up to -5°C and provides excellent adhesion to all metals, including aluminum, galvanized steel and stainless steel. The product is compatible with high-pressure water jet as the surface preparation. Transpoxy Neoprime Can be applied on various metal surfaces. Has high corrosion resistance. Transpoxy Primer It is an anticorrosive primer that can be used in industrial and marine environments. Can also be used as a holding primer. Transpoxy Shopprimer It is a rapid drying epoxy shop primer with high resistance. Can also be used as a holding primer.

Topcoat

Transocean

Transvinypox FF It is a vinyl modified epoxy resin-based, double-component, solvent epoxy paint. Provides excellent barrier properties. It is used as a binder transition coat under antifouling paints, as a midcoat under other topcoat paints and as a single-coat paint in interior areas. Low flame spread feature. Has been certified according to MED Module B, Directive no. 2014/90/EU and SOLAS 74, Reg. II-2/3, II-2/5, II-2/6, II-2/9 & X/3, IMO MSC/Circ. 1120, 2000 HSC Code 7 and IMO FTP Code. Transcryl Finish It is a single-component, acrylic paint. It has excellent color and gloss retention. It is an acrylic resin-based non-yellowing acrylic paint adhering perfectly to Transpoxy, Transvinyl and Transoprene anticorrosive systems. The product is easy to apply. It has a low flame spread feature and has been certified according to the relevant directives (Directive no. 2009/26/EC and SOLAS 74, Reg. II-2/3, II-2/5, II-2/6, X/3, IMO MSC/Circ. 1120, 2000 HSC Code 7 and IMO FTP). Transothane Finish HS It is a polyacrylic-modified resin-based, aliphatic polyurethane topcoat paint with excellent color and gloss retention. Resistant to weather conditions, abrasion, impacts and chemicals. Can be used as a topcoat paint on the outer surfaces of tanks and as a topcoat in chemical plants, oil refineries, bridges, offshore platforms, yachts and ships. Meets the MIL-PRF-85285C Type 2 specifications. Transunilac Finish It is a high quality modified alkyd-based alkyd topcoat developed for use on boot top, sideboard, decks and superstructures. It is a durable product with gloss and color retention. Can be produced in a variety of colors and easily applied. It is a system with low flame spread feature together with the Transogard Primer to be applied as an undercoat and has been certified according to the relevant directives (Directive no. 2009/26/EC and SOLAS 74, Reg. II-2/3, II-2/5, II-2/6, II-2/9 & X/3, IMO MSC/Circ. 1120, 2000 HSC Code 7 and IMO FTP).

Tank Paints

Transocean

Transpoxy Deep Tanks It is an epoxy paint resistant to chemicals. Can be used in fuel and oil tanks. Transpoxy Guard PTW is a double-component, WRAS-certified, solvent-free epoxy paint. Developed for use in high-corrosive environments. Suitable for drinking water contact. It is suitable for food contact. Resistant to fresh water, sea water and crude oil. Does not contain V.O.C. Does not contain benzyl alcohol and nonyl phenol. Resistant to corrosive conditions. It is used in the drinking and potable water tanks, drinking water tanks and pipes, cereal silos and tanks, crude oil tanks, port facilities and industrial plants where these conditions have occurred.

Decorative Paints

Paints

Interior Paints Acrylic emulsion-based, PTFE-enhanced interior finish with high stain resistance, antibacterial protection, and a silk-matte appearance. Pack sizes: 2.5 L / 7.5 L / 15 L PTFE helps release stains such as oil, ketchup, pen, and watercolor. Breathable, high hiding power, easy to apply, and washable. Suitable for hospitals, schools, offices, kitchens, and similar spaces. Apply two coats by brush or roller 24 hours after primer, thinned 10–15% with water. Wait at least 6 hours between coats. Coverage: 14–18 m² per coat (depending on surface). Pack sizes: 2.5 L, 7.5 L, 15 L Exterior Paints Acrylic emulsion-based exterior paint with high water repellency and resistance to moisture and rain. Pack sizes: 2.5 L / 7.5 L / 15 L Silicone-enhanced and water-resistant. High vapor permeability lets moisture escape. Resistant to moisture, water, alkalis, and chemicals; stands up to sun and salty sea air. For concrete, aerated concrete, brick, block, and mineral plasters. Not for elastic coating systems. Apply two coats at least 24 hours after priming, thinned 10–15% with water. Wait at least 6 hours between coats. Do not thin dark colors more than 5%. Do not apply in rain. With MASTERLINE Filled Primer: 7–10 m² per kg (one coat); typically 5–7 m² depending on surface. Pack sizes: 2.5 L, 7.5 L, 15 L

Thinners

Transocean

Universal Thinner 6.01 It is a universal paint thinner. Transocean Alkyd Thinner 6.00 It is an alkyd paint thinner. Transocean Epoxy Thinner 6.03 It is an epoxy paint thinner. Transocean Ioz Thinner 6.07 It is an ethyl silicate paint thinner. Transocean PU Thinner 6.04 It is a polyurethane paint thinner.

Putties

PACKINK Marine

Armuz Putty Filler (918-1135) It is a polyurethane based, double-component putty filler. Has an elastic structure. Provides perfect protection against sea water. It has high adhesion and filling power and does not cause volume loss (sedimentation). It is used in caulking processes of wooden boats and in cracks and as a joint filler due to its elasticity. Epoxy Light Filler Rapid Putty (919-3007) It is a solvent-free epoxy resin-based light putty developed for rapid applications. Used to eliminate defects on primed surfaces before the application of topcoats. It has high adhesion and filling power and does not cause volume loss (sedimentation). Provides high resistance against sea water. Has perfect sanding ability. Epoxy Light Putty (919-3005) It is a solvent-free epoxy resin-based light putty. Does not cause much weight to be formed on the boat thanks to its low weight density. It has high adhesion and filling power and does not cause volume loss (sedimentation). Provides high resistance against sea water. Yields very good results in thick coat applications and does not run. Has perfect sanding ability. Used as a filler to eliminate surface defects on proper primers in sheet metal, wooden and fiber boats. Epoxy Putty (919-3001) It is a double-component, solvent-free epoxy resin-based product. It has high adhesion and filling power and does not cause volume loss (sedimentation). Provides high resistance against sea water. Easily sanded. Used as a filler to eliminate surface defects on proper primers in sheet metal, wooden and fiber boats. Polyurethane Putty (918-1130) It is a polyurethane based, double-coated putty used for insulation and adhesive purposes. Provides perfect protection against sea water with its elastic structure. It has high adhesion and filling power and does not cause volume loss (sedimentation). Used on all kinds of wooden, fiber and laminated boats.

Primers

PACKINK Marine

Acrylic Finish Primer (342 Series) It is an acrylic based, double-component topcoat paint primer that dries rapidly and is easily sanded. Used as a filler on the surface before the topcoat and to create a smooth surface for the topcoat paint. Can be applied in two coats with a brush, roller and a spray gun. Can be diluted with PU Acrylic thinners. Suitable for use on all kinds of wooden, fiber and sheet metal boats. Synthetic or polyurethane-based topcoat paints can be applied on 4+1 acrylic primer. Can be sanded after fully dried to apply the topcoat paint. Ferrolin Synthetic Primer (514 AND 517 SERIES) It is an alkyd-based, rapidly drying, anti-rust primer containing anticorrosive pigments. It is used as the first anti-rust primer coat in industrial and marine air conditions when it is desired to protect iron and steel surfaces with synthetic based topcoat paint systems. High Build Epoksi Filler (342 Series) High Build Epoxy Filler (342 Series) It is a double compound epoxy resin-based primer. Resistant to sea water. It is a primer with high filling capacity. Used as the first primer and midcoat primer on wooden and fiber surfaces. It is used as a midcoat primer on Promastic Epoxy on Sheet Metal/Steel surfaces. Promastic Epoxy (348 Series) It is a double-component mastic epoxy-based primer with surface tolerance preventing rust progression in highly humid environments. Shows very high adhesion and anti-rust features on sheet metal/steel surfaces which are not properly cleaned. Synthetic Intermediate Primer (506 Series) It is an alkyd binder based topcoat primer with high coverage, adhering very well to the first primer coat and preparing a solid and smooth surface for the topcoat paint. The product should not be applied directly to concrete, inorganic zinc and galvanized surfaces. Used as a topcoat primer under synthetic alkyd binder-based topcoat paints.

Topcoat

PACKINK Marine

Sideboard Upper Structure Paint (046) It is an alkyd binder based, air dry topcoat paint which can be applied to side boards, superstructures and inner parts of boats. Has excellent durability, high gloss and color retention features. Epoxy Topcoat (169 SERIES) It is a double-compound, epoxy-polyamide based, glossy topcoat. Has a perfect adhesion feature. Extremely resistant to abrasion and friction. Resistant to sea water, mineral oils and many chemical substances. Dry film thickness of 40 microns is recommended in 1-2 coats during application. Boot Top Paint (045 Series) It is an alkyd binder based, air-dry glossy boot top paint with colophony resin additives. It is a very good protector on the boot top which is exposed to the most severe conditions on the sea. Adheres to the surface very well. Resistant to water, oil and friction. Deck Stain (041 SERIES) It is a high-quality alkyd binder-based deck topcoat stain modified to resist periodic contact with sea water. In addition to its very good color and gloss retention, it is also resistant to corrosion in walking areas. Flexibility feature enables good adhesion on various anticorrosive primers. Should not be applied directly to concrete, inorganic zinc and galvanized surfaces. Polyurethane Acrylic Topcoat (155 SERIES) It is a double-component, polyurethane acrylic based topcoat paint. Resistant to all kinds of scratches, impacts and yellowing that will occur in the marine environment due to its acrylic structure. Has a very high gloss and color retention feature.

Antifouling

PACKINK Marine

TBTO Free Antifouling (279-2575) It is a seasonal-lasting and high-resistance antifouling paint, specifically designed to prevent the surfaces in water from being covered and trapped by bacteria, moss, shellfish and similar organisms. The product does not contain TBTO in compliance with international standards. It has been certified by the British classification society Lloyd's Register. TBTO Free Antifouling (Long Life) (279-2710) It is a long-lasting and high-resistance antifouling paint, specifically designed to prevent the surfaces in water from being covered and trapped by bacteria, moss, shellfish and similar organisms. The product does not contain TBTO in compliance with international standards. It has been certified by the British classification society Lloyd's Register.

Varnish

PACKINK Marine

PACKINK-LAK Glossy Varnish (617 Series) It is a single-component, alkyd resin-based, air-dry, glossy varnish. Provides a full and glossy appearance due to its high solid content. It is extremely resistant to scratches and abrasion. Resistant to solar rays and sea water. At least 3 coats are applied by allowing one-day in between the coats during the application process. It is applied to the inner and outer wooden parts of watercraft floating above the waterline. Synthetic Yacht Varnish, Glossy (345) It is a single-component, alkyd based, air-dry, glossy wood varnish developed for use on yachts and boats. Forms anti-scratch and anti-abrasion, hard, elastic and very glossy surfaces. Resistant to solar rays, sea water and atmospheric conditions. At least 3 coats are applied by allowing one day in between the coats during the application process. It is applied to the inner and outer wooden parts of watercraft floating above the waterline.

Special Purpose Products

PACKINK Marine

Epoxy Lamination Resin It is a double-component, solvent-free, epoxy-based transparent adhesive and fiber coating lamination resin. It is used in bonding and fiber coating processes on wooden boats and in bonding, repair and maintenance works on fiber boats. Has high mechanical and physical resistance. Can be used as filler resin and adhesive by adding fill materials. It is also used as the first primer with low viscosity for osmosis treatment on fiber boats. Can be applied with a brush, roller and airless gun. Luminescent Paint (041-0706) It is an alkyd resin-based, glossy topcoat paint containing special luminescent pigments. Provides a more comfortable vision of the surface in dark environments thanks to its luminescent structure. Can be used for safety reasons on boats. It can also be used in fire escapes in hotels and buildings as well as to highlight emergency exits. Anti-skid Paint (041) It is an alkyd resin-based, synthetic, semi-matt anti-skid topcoat developed for use on wet floors on decks. Provides safety by preventing feet from slipping on boat decks, on the edge of pools and on stairs. Polyurethane Deck Coating (KPA SERIES) It is a double-component, polyurethane based, solvent-free coating and insulation material. It is used for coating all kinds of wood, metal, stone, plaster, etc. surfaces and for waterproofing purposes. It is particularly used for waterproofing of tanks, pipes and concrete structures on the decks of boats and ships. Suitable for brush and roller application. By this means, it provides ease of use on decks and areas where spatula cannot be used for application. Completely fills the surface in the plywood bonding process and prevents gaps and water ingress from occurring. No change in volume is observed after fully dried. PU thinner is used for thinning, if required. The product is cream colored. PU Impregnated Wooden Boat Primer (EMP SERIES) It is a single-component, polyurethane-based, moisture curing, first layer transparent impregnated wood primer. Can be applied on all wooden surfaces with brush, roller and airless gun. Since its ability to penetrate into wood pores is very high, it saturates the wood and enhances the adhesion ability of putty and primers to be applied on it. It should be thinned with polyurethane thinner by 20-40% and applied in a manner not leaving a glossy film on the surface. In applications exceeding 8 hours in between the layers, the surface should be lightly sanded for the other coat to be applied.

Land Vehicles

Defence and Military Coatings

2K UNIVERSAL PLASTIC SURFACE PRIMER This is a non-chromate polyester primer intended for exterior applications. It is designed for use on pre-treated galvanized steel to deliver strong resistance against moisture and corrosion. ALKYD SYSTEM (PRIMER) (P80) Known as PACKINK-KYD HB PRIMER, this is a single-part, modified alkyd primer with a high-body formulation. It is formulated for moderately corrosive areas, offers quick drying times, and withstands harsh atmospheric conditions when applied to industrial steel structures and port equipment. PACKINK RUST CONVERTER (P94) A water-based, single-component solution that actively converts surface rust and bonds to it. Once it dries, it can be overcoated with various paint systems. PACKINK WEAPON PAINT (322-9586) Specifically created for finishing the sheet metal parts of weapon grips, providing a matte black coating with strong adhesion properties. PACKINK-GUARD 2K UNDERBODY PU (K52) A two-part solvent-based polyurethane coating crafted to protect vehicle undercarriages from stone chipping. It provides a flexible, impact-resistant layer that adheres well to aluminum and steel while enduring corrosive environments. PACKINK-GUARD EPOXY (K10) A high-solid, two-part epoxy formulated for severe corrosive settings, offering strong chemical, abrasion, and impact resistance along with low VOC emissions. It bonds to steel and aluminum, serving as a standalone interior coating for military vehicles or as an exterior primer under a topcoat. PACKINK-GUARD EPOXY TOPCOAT (K35) This low-VOC, two-component high-solid epoxy finish is designed for extreme corrosive conditions. It delivers excellent resistance to impacts, abrasion, and chemicals, making it a reliable topcoat for military vehicles operating in harsh atmospheres. PACKINK-GUARD EPOXY GF COAT (K53) Reinforced with glass flakes, this two-part, high-solid epoxy coating is ideal for highly corrosive areas. It is a low-VOC product that withstands abrasion, crude oil, and seawater, making it suitable for military transport, bridges, splash zones, and industrial pipes. PACKINK-GUARD HERES (K54) A single-part silicone resin topcoat engineered for high-temperature applications, capable of withstanding dry heat up to 600°C. It resists corrosive elements and is applied to military vehicle components that get extremely hot, like engines and exhausts. PACKINK-GUARD NON-SKID (K50) A solvent-free, two-part epoxy designed to create a slip-resistant surface on military vehicles. It bonds effectively to aluminum and steel, offering strong protection against chemicals, impacts, abrasion, and corrosive atmospheres. PACKINK-GUARD PHENOLIC (K55) A two-component, high-solid novolac epoxy that can function as both a primer and topcoat. Tested by independent labs to meet the MIL-PRF-4556F standard, it provides a low-VOC, hot water and chemical-resistant finish for military vehicles, industrial facilities, and storage tanks in highly corrosive areas. PACKINK-GUARD POLYUREA (K90) This fast-curing, VOC-free coating can be applied in exceptionally thick layers even at low temperatures. It is highly flexible and provides outstanding chemical and mechanical resistance. PACKINK-GUARD PU SONKAT (K33) A unique two-part matte acrylic polyurethane topcoat cured with an aliphatic isocyanate. It is celebrated as the world's first product to combine anti-flammability with IR-reflective properties that meet military standards, while also ensuring great color and gloss retention. PACKINK-POL ROOF COATING (C77) A flexible, two-component polyester-modified polyurethane finish that cures with aliphatic isocyanate. It is highly resistant to corrosive environments and can be applied directly over old paint to deliver excellent gloss and color retention on steel structures, pipes, and industrial tanks. PACKINK-POX DEFENSIVE COATING A certified (JIS Z 2801 and TS EN 15457), solvent-free, two-part epoxy coating. It can be applied via brush, roller, or airless spray in environments like pharmaceutical warehouses, food production facilities, and refrigerated transport. EPOXY FLOORING (PRIMER) (P55) PACKINK-POX SF PRIMER is a VOC-free, two-part solventless epoxy primer designed to deeply penetrate and prepare fully cured concrete. It offers high chemical resistance and is an ideal base for epoxy mortars or self-leveling applications in industrial and port facilities with heavy traffic. EPOXY FLOORING (TOPCOAT) (C50) PACKINK-POX FLOOR COATING-51 is a VOC-free, two-component self-leveling epoxy finish. It provides strong mechanical and chemical durability for concrete floors dealing with varying load capacities, and can be textured for slip resistance in spaces like hangars, hospitals, and parking garages.

Marine Paints

Defence and Military Coatings

Transocean Armada A solvent-free, single-part antifouling coating based on hydrolyzed silyl acrylate resin, utilizing biocides and di-copper oxide. It features a self-polishing mechanism that keeps submerged hulls smooth and free of marine growth for up to 60 months, making it especially effective for vessels with low activity, while remaining compliant with AFS/CONF/26 regulations. Transocean Cleanship This tin-free, hybrid resin antifouling paint uses a balanced mix of hydrophilic and hydrophobic resins to achieve controlled water leaching and self-wearing properties. It provides up to 60 months of protection and is easy to repaint, conforming to AFS/CONF/26 standards. Transocean Optima A self-wearing, tin-free antifouling formula containing a blend of biocides for use alongside Transocean anticorrosive systems. It offers long-term protection for up to 36 months and meets IMO AFS/CONF/26 requirements. Transogard Primer A high-build alkyd primer utilizing non-toxic pigments to defend steel structures in marine and industrial settings. It adheres well to powertool-cleaned surfaces and can be overcoated with Transacryl and Transunilac finishes, though it is not meant for constant water immersion or application over zinc-primed steel. Transoprime Designed to provide robust resistance against seawater, this product is suitable for application on surfaces that have undergone minimal cleaning. Transoweld Primer 1.56 A fast-drying ethyl silicate shop primer that delivers excellent corrosion defense without impeding welding speeds, thanks to its zinc powder content. It holds a DNV-GL Type Approval and is an IMO-PSPC approved option for ballast and crude oil tanks. Transozinc Epoxy primer 1.75 An excellent high-zinc epoxy primer for new onshore and offshore construction. It reacts with the elements to create an insoluble, corrosion-resistant shield, offering easier application and surface preparation compared to silicate alternatives. Transpoxy Barrier FF An IMO-PSPC approved primer suitable for all vessel areas, offering strong seawater resistance even on minimally cleaned surfaces. It can be applied in temperatures as low as -5°C, bonds well to properly prepped old paint, and comes in specific seasonal variations for optimal performance. Transpoxy Masterbond BT A heavy-duty, high-solid (over 80%) epoxy sealant that minimizes emissions and meets VOC standards. Its exceptional adhesion and surface tolerance make it ideal for new builds or repairs, while its chemical resistance satisfies MIL-PRF 4556 F jet fuel storage criteria. Transpoxy Unicote A versatile, highly anti-corrosive epoxy polyamide primer capable of curing at -5°C. It adheres strongly to stainless steel, galvanized steel, and aluminum, and is fully compatible with surfaces prepared by high-pressure water jetting. Transpoxy Neoprime This product delivers superior corrosion resistance and is suitable for application across a variety of metal surfaces. Transpoxy Primer An anti-corrosive coating designed for marine and industrial environments, which can also function effectively as a holding primer. Transpoxy Shopprimer A highly resistant, fast-drying epoxy shop primer that can additionally be utilized as a holding primer. Transvinypox FF A double-component, solvent-based vinyl-modified epoxy paint offering outstanding barrier protection. It serves as a single-coat finish for interiors, a transition layer under antifouling paints, or a midcoat, and is certified for its low flame spread under MED, SOLAS, and IMO guidelines. Transcryl Finish An easy-to-apply, single-part acrylic topcoat that resists yellowing and maintains excellent gloss and color. It bonds perfectly to Transoprene, Transvinyl, and Transpoxy systems and holds certifications for low flame spread across several maritime directives. Transothane Finish HS A polyacrylic-modified aliphatic polyurethane topcoat delivering top-tier color and gloss retention alongside strong resistance to chemicals, impacts, abrasion, and weather. It is used on exterior tank surfaces, ships, yachts, and offshore platforms, complying with MIL-PRF-85285C Type 2 standards. Transpoxy Deep Tanks A chemically resistant epoxy coating specifically designed for use in oil and fuel tanks. Transpoxy Guard Known as PTW, this WRAS-certified, solvent-free, two-part epoxy is formulated for highly corrosive areas and is safe for food and drinking water contact. Free of VOCs, nonyl phenol, and benzyl alcohol, it resists crude oil and seawater, making it ideal for silos, port facilities, and potable water tanks. Transunilac Finish A premium modified alkyd topcoat created for superstructures, decks, sideboards, and boot tops, offering enduring gloss and color. It is easy to apply, available in multiple colors, and achieves a low flame spread rating when paired with Transogard Primer. Universal Thinner 6.01 A general-purpose thinner designed for a variety of paint applications. Transocean Alkyd Thinner 6.00 A specialized thinner formulated specifically for use with alkyd-based paints. Transocean Epoxy Thinner 6.03 A thinning agent specifically intended to be mixed with epoxy paint systems. Transocean Ioz Thinner 6.07 A dedicated thinner made to be used with ethyl silicate paints. Transocean PU Thinner 6.04 A specific thinner engineered for polyurethane-based paint products.

Automotive - Transportation, Playground

Polyester

GENERAL PURPOSE POLYESTER (511-0196) It is an orthophthalic-based polyester with medium reactivity. Wets the glass fiber quickly and perfectly. Besides its high physical durability features, it has sufficient resistance against chemicals in line with its intended use. (Please see the tables of chemical resistance) Used in the production of bus, truck, car hoods, in boat, yacht, railway wagon, auto trailer applications and in the production of water and storage tanks of various chemical substances. HEAT AND CHEMICAL RESISTANT ISO POLYESTER (511-0199) 0199, an isophthalic-based, reactive unsaturated polyester, has excellent heat resistance and low di-electric value with its excellent bending temperature value under high load together with very good chemical resistance features. FRP parts produced with this polyester can greatly retain their properties when exposed to temperatures up to 150°C for a long time period and for a short time up to 200°C (- appropriate post-curing is process required; please kindly contact our technical service considering the application conditions). Furthermore, PACKINKLUX polyester is among the best polyesters with a very good resistance to polyester solvents. In addition to the aircraft industry, for which it was designed in the past, it is successfully used as a high-performance polyester in all sensitive application areas where high thermal, electrical and chemical resistance is desired. It is an ideal isophthalic polyester for hot curing systems with its reactive structure. ISO RTM POLYESTER (511-0085) It is an isophthalic-based, medium reactivity polyester, containing accelerators and designed for RTM applications. ISO RTM POLYESTER (511-0771/0774/0777/0778) It is an isophthalic-based, medium reactivity polyester designed for RTM applications. Wets glass fiber quickly and perfectly. With its specifically optimized curing characteristics, yields excellent results even in thick parts made with RTM. ISO/NPG GELCOAT-BRUSH TYPE PREACCELERATED (526-0085) It is a transparent, high quality acrylic modified isophthalic-NPG gelcoat resin containing anaccelerator and developed for applications requiring high performance. Developed with acrylic modification and UV resistance materials, PACKINKSTER GC 0085 has a wide range of applications with its superior climatic resistance, water resistance, superior product properties against impact and abrasion. ISO/NPG POLYESTER (511-0395) It is an isophthalic-based, medium reactivity polyester designed for RTM applications. Wets glass fiber quickly and perfectly. With its specifically optimized curing characteristics, yields excellent results even in the manufacture of thick parts made with RTM. Besides its high physical durability features, it has sufficient resistance against chemicals in line with its intended use. ISOPHTALIC POLYESTER (511-0272) PACKINKLUX 272 is used in petrochemical complexes, refineries, in fertilizer, paper and acid industries, in areas where high chemical and physical resistance and durability is required, particularly in the manufacturing of pipes and various tanks by filament winding method. PACKINKLUX 272 is an isophthalic-based, unsaturated polyester with medium reactivity and low viscosity with high mechanical resistance and durability features. Its low viscosity allows good and quick wetting of the glass fiber. The polyester is ideal for use in the filament winding method with this feature. Parts cured with PACKINKLUX 272 have high-mechanical durability even in humid environments with medium temperature up to 60°C. ISOPHTHALIC RTM POLYESTER (511-0779) It is an isophthalic-based, medium reactivity polyester designed for RTM applications. Wets glass fiber quickly and perfectly. With its specifically optimized curing characteristics, yields excellent results even in thick parts made with RTM. PACKINK-PREG P 17-502 (511-0017) It is an orthophthalic based polyester with high reactivity and medium viscosity designed for SMC and BMC applications. It is ideal for forming and joining thin parts with low laminating feature besides its ease of curing in hot molded systems with its high-reactivity feature. PACKINK-TAL P 80-502 (511-0080) It is an orthophthalic-based, high reactivity polyester, designed for RTM applications. With its high filler tolerance capacity, it wets glass fiber quickly and perfectly. With its specifically optimized curing characteristics, yields excellent results even in thick parts made with RTM. RTM POLYESTER (511-0770) It is an orthophthalic-based, medium reactivity polyester designed for RTM applications. Wets glass fiber quickly and perfectly. With its specifically optimized curing characteristics, yields excellent results even in thick parts made with RTM. SMC POLYESTER (511-0900) It is a versatile hot molding polyester, specifically designed for SMC and BMC applications. It is ideal for forming and joining thin parts with low laminating feature besides its ease of curing in hot molded systems with its high-reactivity feature. Having a flow characteristic facilitating pre-mixing due to its high filling lifting capacity, PACKINKLUX 900 has a long-term long stock ability. Besides the superior surface characteristics and high heat deformation on the finished product, PACKINKLUX has the best compatibility feature with pigment pastes. SMC/BMC POLYESTER (511-0910) It is a versatile hot molding polyester, specifically designed for SMC and BMC applications. It is ideal for forming and joining thin parts with low laminating feature besides its ease of curing in hot molded systems with its high reactivity feature. Having a flow characteristic facilitating pre-mixing due to its high filling lifting capacity, PACKINKLUX 910 has a long term long stock ability. Besides the superior surface characteristics and high heat deformation on the finished product, PACKINKLUX has the best compatibility feature with pigment pastes. THIXOTROPIC POLYESTER (511-0491) It is used in petrochemical complexes, refineries, in fertilizer, paper and acid industries, in areas where high chemical and physical resistance and durability is required, particularly in the manufacturing of pipes and various tanks by filament winding method. PACKINKLUX 491 is an isophthalic-based, unsaturated polyester with medium reactivity and low viscosity with high mechanical resistance and durability features. Its low viscosity feature ensures very good and quick wetting of the glass fiber. The polyester is ideal for use in the filament trimming spray method with this feature. Parts cured with PACKINKLUX 491 have high mechanical durability even in humid environments with medium temperature up to 60°C. TIX, PA GENERAL PURPOSE POLYESTER (511-0496) It is an orthophthalic-based, tix-structured and pre-accelerated polyester with medium reactivity. Wets glass fiber quickly and perfectly. Besides its high physical durability features, it has sufficient resistance against chemicals in line with its intended use. (Please see the tables of chemical resistance) Used in the production of bus, truck, car hoods, in boat, yacht, railway wagon, auto trailer applications and in the production of water and storage tanks of various chemical substances.

Construction

Polyester

BRETON TYPE POLYESTER (511-0921/0923/0927/0930) It is an improved unsaturated polyester used for producing synthetic granite using the vacuum, heat support and pressure molding method using the Breton Technology. Furthermore, it can be used in general purpose orthophthalic application areas, as well as used successfully in transparent applications with its low gardner feature. It has been designed in accordance with the pressure molding process in the production of orthophthalic-based synthetic granite. Adds elasticity to synthetic granite as well as excellent mechanical and physical properties such as good chemical resistance, UV feature (non-yellowing) and water resistance. It is a medium reactivity polyester with low viscosity. Besides its high physical properties, it has adequate resistance to chemicals in line with its intended use. When resistance to chemical environment is in question, please kindly contact our technical room. CASTING TYPE POLYESTER (511-0735/0739) It is a polyester specifically developed for the production of various sanitary materials. It is extensively used in the construction of bathtubs, bathroom sinks and kitchen sinks, kitchen countertops, shower bases and various pool elements. PACKINKLUX 735 is a reactive polyester with medium viscosity and short gel-time. It has a high capacity to allow fillers and yields low exothermic properties during the hardening process and does not shrink and crack. GENERAL PURPOSE POLYESTER (511-0190) It is an orthophthalic-based polyester with medium reactivity. Wets the glass fiber quickly and perfectly. Besides its high physical durability features, it has sufficient resistance against chemicals in line with its intended use. (Please see the tables of chemical resistance) Used in the production of buses, trucks, car hoods, in boat, yacht, railway wagon, auto trailer, composite construction applications and in the production of water and storage tanks of various chemical substances. ISO PULTRUSION POLYESTER (511-0950) PACKINKLUX 950 - specifically designed for pultrusion applications. It provides rapid and complete curing with its high wetting feature. PACKINKLUX 950 products, prepared with the correct proportions with PACKINKLUX 185 plasticizer resin, provide high mechanical durability and resistance to weather conditions. ISO/NPG POLYESTER (511-0380) It is suitable for the production of quality gelcoats with its excellent hydrolytic stability and resistance to outdoor conditions, abrasion and with its impact resistance. It is recommended to be used as a high performance resin, particularly in the boat industry with its low water absorption and in the production of all kinds of glass-reinforced parts that require both high mechanical values or where chemical resistance is sought (see the table of chemical resistance). PACKINKLUX 380 is an isophthalic, NPG-based, unsaturated polyester with medium reactivity and low viscosity with high mechanical and chemical resistance and durability features. It can be used successfully by hand lay-up in ambient conditions and in all kinds of machines and hot applications. Please kindly contact our technical service for special applications and the UV resistant version. ISO/NPG POLYESTER (511-0392) PACKINKLUX 392 is suitable for the production of quality gelcoats with its excellent hydrolytic stability and resistance to outdoor conditions, abrasion and with its impact resistance. It is recommended to be used as a high performance resin, particularly in the boat industry with its low water absorption and in the production of all kinds of glass-reinforced parts that require both high mechanical values or where chemical resistance is sought (see the table of chemical resistance). PACKINKLUX 392 is an isophthalic, NPG-based, unsaturated polyester with medium reactivity and low viscosity with high mechanical resistance and durability features. It can be used successfully by hand lay-up in ambient conditions and in all kinds of machines and hot applications. Please kindly contact our technical service for special applications and the UV resistant version. ISOPHTALIC POLYESTER (511-0272) PACKINKLUX 272 is used in petrochemical complexes, refineries, in fertilizer, paper and acid industries, in areas where high chemical and physical resistance and durability is required, particularly in the manufacturing of pipes and various tanks by filament winding method. PACKINKLUX 272 is an isophthalic-based, unsaturated polyester with medium reactivity and low viscosity with high mechanical resistance and durability features. Its low viscosity allows good and quick wetting of the glass fiber. The polyester is ideal for use in the filament winding method with this feature. Parts cured with PACKINKLUX 272 have high-mechanical durability even in humid environments with medium temperature up to 60°C. CHEMICAL RESISTANT POLYESTER (511-0600) Has been formulated to be used in petrochemical complexes, refineries, in fertilizer, paper and acid industries and in areas where high chemical and physical resistance and durability is required. It is also extensively used in the construction and molding of storage tanks, pipes and conduits, chimneys and similar facilities for various chemical substances. PACKINKLUX 600 is an epoxy modified bisphenol-based polyester having the best resistance against many chemical substances. Has excellent acid and especially alkali resistance. It easily endures the corrosive effects of a large group of chemicals, even at temperatures up to 95°C. (Please see the table of chemical resistance). ORTHOPHTHALIC POLYESTERS FOR CORRUGATED AND FLAT BOARDS (511-0740/0750/0755/0759) It is a medium-high reactivity, flexible, unsaturated polyester resin, suitable for transparent and opaque sheet production and specifically designed for use in flat continuous sheet production machines. It is an orthophthalic based, medium-high reactivity polyester with low viscosity. Wets glass fiber quickly and perfectly. Thanks to its clear structure, it is ideal for use on transparent sheets, whereas it can also be used on filler-applied boards without any issues. ORTOPHTALIC-BASED POLYESTER RESIN (511-0780) It is an orthophtalic, unsaturated polyester resin-based design to be used as body resin in pipes manufactured with centrifugation method of FRP (Fiber glass Reinforced Plastic Pipes) reinforced with trimmed glass fiber. PLASTICIZER POLYESTER (511-0181) It is not suitable to be used solely for glass fiber reinforced (FRP) works. It is often used as a modifying polyester to correct the brittleness, continuous laminating and cracking tendencies of all other polyesters. Very good results are obtained when added to casting and general-purpose polyesters in certain proportions (Max. 30%). It is used in the manufacture of electrical materials and particularly in ballast filling works with filler additives. PLASTICIZER POLYESTER-PULTRUSION (511-0185) It is an orthophthalic-based unsaturated polyester with high elasticity features, specifically designed for pultrusion applications. PACKINKLUX 950 products, prepared with the correct proportions with PACKINKLUX 185 plasticizer resin, provide high mechanical durability and resistance to weather conditions. Mixture ratios depend on the formula properties of the pultrusion product, however mixtures in the ratio of 5-10% are recommended.

Buttons

Polyester

BUTTON POLYESTER (511-0703) With its excellent transparency and flexible structure yielding low exotherm, PACKINKLUX 703 is a polyester resin suitable for roller type button manufacturing techniques. PACKINKLUX 703's optimal curing (hardening) rate allows easy cutting, machining and polishing of washers obtained from calendered plates. Provides excellent flexibility and non-yellowing feature thanks to its adipic acid structure. PACKINKLUX 0703 perfectly complies with mother-of-pearl, pigment pastes and other additives used in button manufacturing. BUTTON POLYESTER (511-0706/0707) With its excellent transparency and flexible structure yielding low exotherm, PACKINKLUX 707 is a polyester resin suitable for both roller type and rod type button manufacturing techniques. BUTTON POLYESTER (511-0709) With its excellent transparency and flexible structure yielding low exotherm, PACKINKLUX 709 is a polyester resin suitable for both roller type and rod type button manufacturing techniques. Offers endless options to the creativity of button designers with the high-viscosity version PACKINKLUX 706 (511-0706) and with the versions PACKINKLUX 716 (Standard thixotropic) and PACKINKLUX 717 (low thixotropic) thixotropized in two different ratios. PACKINKLUX 709's optimal curing (hardening) rate allows easy cutting, machining and polishing of washers obtained from calendered plates, rods and die castings. PACKINKLUX 709 perfectly complies with mother-of-pearl, pigment pastes and other additives used in button manufacturing.

Gel Coats

Polyester

PACKINKSTER GC6100 BRUSH TYPE PRIMER GELCOAT (526-6100) It is an economical brush type gelcoat which can be used in the production of all kinds of materials to be painted after production in the automotive industry. 526-7034 BRUSH TYPE PRIMER GELCOAT It is an economical brush type gelcoat which can be used in the production of all kinds of materials to be painted after production in the automotive industry. It can be manually sanded or by a sanding machine. It is grey colored in order to make the mistakes that occur during the application of the primer easier to be noticed and is delivered as a ready-to-use product. No blisters are formed when it is baked to harden the paint applied on it. It does not crack due to the effects of impact and temperature changes during cutting and assembly processes or while driving the vehicle. GELCOAT - BRUSH TYPE (526-0033) With its isophthalic based high physical durability and excellent water resistance properties, it has been specifically designed for vehicle body, small and medium sized boat molding which are systems on which topcoat paints will be applied and are large volume reinforced applications. Due to its thixotropic structure, it does not sag on vertical surfaces and can be easily applied with a brush. Please contact our technical service for detailed information. ISO GELCOAT - SPRAY TYPE (526-0083) With its isophthalic based high physical durability and excellent water resistance properties, it has been specifically designed for vehicle body, small and medium sized boat molding which are systems on which topcoat paints will be applied and are large volume reinforced applications. Contains UV stabilizer for UV resistance. Due to its thixotropic structure, it does not sag on vertical surfaces and ideal for spray applications. Please contact our technical service for detailed information. ISO/NPG GELCOAT (526-0070) It is a transparent, high quality isophthalic-NPG gelcoat developed for applications requiring high performance. Developed with UV resistance materials, PACKINKLUX GC 0070 has a wide range of applications with its superior climatic resistance, water resistance, superior product properties against impact and abrasion. Thanks to its very low water absorption feature, it is recommended to be used in exterior applications (particularly in the maritime industry) whereas it can be used successfully in many chemical fields due to its chemical resistance. ISO/NPG GELCOAT-BRUSH TYPE PREACCELERATED (526-0085) It is a transparent, high quality acrylic modified isophthalic-NPG gelcoat resin containing anaccelerator and developed for applications requiring high performance. Developed with acrylic modification and UV resistance materials, PACKINKSTER GC 0085 has a wide range of applications with its superior climatic resistance, water resistance, superior product properties against impact and abrasion. ISO/NPG GELCOAT-SPRAY TYPE-PREACCELERATED (526-0075) It is a transparent, high quality acrylic modified isophthalic-NPG gelcoat resin containing an accelerator and developed for applications requiring high performance. Developed with acrylic modification and UV resistance materials, PACKINKSTER GC 0075 has a wide range of applications with its superior climatic resistance, water resistance, superior product properties against impact and abrasion.

PACKINK Paste and Auxiliary Materials

Polyester

POLYESTER ACCELERATOR (549-0050) It is suitable for use in standard orthophthalic and special purpose (heat resistance, chemical resistance, etc.) isophthalic, isophthalic/special glycol, bisphenol A based unsaturated polyester resins for all redox curing systems. With this feature, it has an extensive usage area such as hand lay-up, spray applications, polyester cast artificial marble and mortars, paint systems, centrifuge and filament winding applications. POLYESTER ACCELERATOR (549-0060) It is suitable for use in standard orthophthalic and special purpose (heat resistance, chemical resistance, etc.) isophthalic, isophthalic/special glycol, bisphenol A based unsaturated polyester resins for all redox curing systems. With this feature, it has an extensive usage area such as hand lay-up, spray applications, polyester cast artificial marble and mortars, paint systems, centrifuge and filament winding applications. POLYESTER PACKINK PASTE (556-SERIES) They are used for coloring all types of transparent polyester gelcoats and polyester resins. They have a universal attribute for the resin polyester systems in their structure and cause minimum differences in the curing system they are used in. In general, uses up to 5% will be adequate to achieve sufficient color intensity and this ratio will not have any adverse impacts on the curing system. However, they can be used in a proportion up to 15% in some cases. In such cases, users should observe the effects of the added resin on the curing system. POLYESTER CATALYST (549-0040) It is suitable for use in standard orthophthalic and special purpose (heat resistance, chemical resistance, etc.) isophthalic, isophthalic/special glycol, bisphenol A based unsaturated polyester resins for all curing systems. With this feature, it has an extensive usage area such as hand lay-up, spray applications, polyester cast artificial marble and mortars, paint systems, centrifuge and filament winding applications. It is also used in curing vinyl esters.

Industrial Applications

Polyester

HEAT AND CHEMICAL RESISTANT ISO POLYESTER (511-0210) 0210, an isophthalic-based, reactive unsaturated polyester, has excellent heat resistance and low di-electric value with its excellent bending temperature value under high load together with very good chemical resistance features. FRP parts produced with this polyester can greatly retain their properties when exposed to temperatures up to 150°C for a long time period and for a short time up to 200°C (- appropriate post-curing is process required; please kindly contact our technical service considering the application conditions). Furthermore, PACKINKLUX polyester is among the best polyesters with a very good resistance to polyester solvents. In addition to the aircraft industry, for which it was designed in the past, it is successfully used as a high-performance polyester in all sensitive application areas where high thermal, electrical and chemical resistance is desired. It is an ideal isophthalic polyester for hot curing systems with its reactive structure. HEAT AND CHEMICAL RESISTANT ISO POLYESTER (511-0199) 0199, an isophthalic-based, reactive unsaturated polyester, has excellent heat resistance and low di-electric value with its excellent bending temperature value under high load together with very good chemical resistance features. FRP parts produced with this polyester can greatly retain their properties when exposed to temperatures up to 150°C for a long time period and for a short time up to 200°C (- appropriate post-curing is process required; please kindly contact our technical service considering the application conditions). Furthermore, PACKINKLUX polyester is among the best polyesters with a very good resistance to polyester solvents. In addition to the aircraft industry, for which it was designed in the past, it is successfully used as a high-performance polyester in all sensitive application areas where high thermal, electrical and chemical resistance is desired. It is an ideal isophthalic polyester for hot curing systems with its reactive structure. ISO/NPG POLYESTER (511-0392) PACKINKLUX 392 is suitable for the production of quality gelcoats with its excellent hydrolytic stability and resistance to outdoor conditions, abrasion and with its impact resistance. It is recommended to be used as a high performance resin, particularly in the boat industry with its low water absorption and in the production of all kinds of glass-reinforced parts that require both high mechanical values or where chemical resistance is sought (see the table of chemical resistance). PACKINKLUX 392 is an isophthalic, NPG-based, unsaturated polyester with medium reactivity and low viscosity with high mechanical resistance and durability features. It can be used successfully by hand lay-up in ambient conditions and in all kinds of machines and hot applications. Please kindly contact our technical service for special applications and the UV resistant version. ISOPHTALIC POLYESTER (511-0272) PACKINKLUX 272 is used in petrochemical complexes, refineries, in fertilizer, paper and acid industries, in areas where high chemical and physical resistance and durability is required, particularly in the manufacturing of pipes and various tanks by filament winding method. PACKINKLUX 272 is an isophthalic-based, unsaturated polyester with medium reactivity and low viscosity with high mechanical resistance and durability features. Its low viscosity allows good and quick wetting of the glass fiber. The polyester is ideal for use in the filament winding method with this feature. Parts cured with PACKINKLUX 272 have high-mechanical durability even in humid environments with medium temperature up to 60°C. CHEMICAL RESISTANT POLYESTER (511-0600) Has been formulated to be used in petrochemical complexes, refineries, in fertilizer, paper and acid industries and in areas where high chemical and physical resistance and durability is required. It is also extensively used in the construction and molding of storage tanks, pipes and conduits, chimneys and similar facilities for various chemical substances. PACKINKLUX 600 is an epoxy modified bisphenol-based polyester having the best resistance against many chemical substances. Has excellent acid and especially alkali resistance. It easily endures the corrosive effects of a large group of chemicals, even at temperatures up to 95°C. (Please see the table of chemical resistance). PACKINK-PREG P 17-502 (511-0017) It is an orthophthalic based polyester with high reactivity and medium viscosity designed for SMC and BMC applications. It is ideal for forming and joining thin parts with low laminating feature besides its ease of curing in hot molded systems with its high-reactivity feature. PLASTICIZER POLYESTER (511-0182) It is not suitable to be used solely for glass fiber reinforced (FRP) works. It is often used as a modifying polyester to correct the brittleness, continuous laminating and cracking tendencies of all other polyesters. Very good results are obtained when added to casting and general-purpose polyesters in certain proportions (Max. 30%). It is used in the manufacture of electrical materials and particularly in ballast filling works with filler additives. SMC POLYESTER (511-0900) It is a versatile hot molding polyester, specifically designed for SMC and BMC applications. It is ideal for forming and joining thin parts with low laminating feature besides its ease of curing in hot molded systems with its high-reactivity feature. Having a flow characteristic facilitating pre-mixing due to its high filling lifting capacity, PACKINKLUX 900 has a long-term long stock ability. Besides the superior surface characteristics and high heat deformation on the finished product, PACKINKLUX has the best compatibility feature with pigment pastes. SMC/BMC POLYESTER (511-0914) It is a versatile hot molding polyester, specifically designed for SMC and BMC applications. It is ideal for forming and joining thin parts with low laminating feature besides its ease of curing in hot molded systems with its high reactivity feature. Having a flow characteristic facilitating pre-mixing due to its high filling lifting capacity, PACKINKLUX 914 has a long term long stock ability. Besides the superior surface characteristics and high heat deformation on the finished product, PACKINKLUX has the best compatibility feature with pigment pastes. NON-FLAMMABLE POLYESTER (511-0326) It is an unsaturated polyester containing fire retardant and self-extinguishing fillers. Does not burn easily thanks to this feature and if it does so, quickly goes out in less than 2 seconds. At the same time, has heat resistance and low di-electric value with its excellent bending temperature value under normal load. FRP parts produced with this polyester can greatly retain their properties when exposed to temperatures up to 100°C for a long time period and for a short time up to 150°C (- appropriate post-curing is process required, please kindly contact our technical service considering the application conditions). It is applied by hand lay up; however it is an ideal isophthalic polyester for hot curing systems with its reactive structure when used with the right accelerator - hardener types and amounts. NON-FLAMMABLE POLYESTER (511-0327) It is an isophthalic-based, reactive, unsaturated polyester containing fire retardant and self-extinguishing features. Does not burn easily thanks to this feature and if it does so, quickly goes out in less than 3 seconds. PACKINKLUX 0327 has excellent heat resistance and low di-electric value with its excellent bending temperature value under high load. FRP parts produced with this polyester can greatly retain their properties when exposed to temperatures up to 100°C for a long time period and for a short time up to 150°C (- appropriate post-curing is process required, please kindly contact our technical service considering the application conditions). It is applied by hand lay-up; however it is an ideal isophthalic polyester for hot curing systems with its reactive structure when used with the right accelerator - hardener types and amounts.

Boats

Polyester

GENERAL PURPOSE POLYESTER (511-0196) It is an orthophthalic-based polyester with medium reactivity. Wets the glass fiber quickly and perfectly. Besides its high physical durability features, it has sufficient resistance against chemicals in line with its intended use. (Please see the tables of chemical resistance) Used in the production of bus, truck, car hoods, in boat, yacht, railway wagon, auto trailer applications and in the production of water and storage tanks of various chemical substances. HEAT AND CHEMICAL RESISTANT ISO POLYESTER (511-0210) 0210, an isophthalic-based, reactive unsaturated polyester, has excellent heat resistance and low di-electric value with its excellent bending temperature value under high load together with very good chemical resistance features. FRP parts produced with this polyester can greatly retain their properties when exposed to temperatures up to 150°C for a long time period and for a short time up to 200°C (- appropriate post-curing is process required; please kindly contact our technical service considering the application conditions). Furthermore, PACKINKLUX polyester is among the best polyesters with a very good resistance to polyester solvents. In addition to the aircraft industry, for which it was designed in the past, it is successfully used as a high-performance polyester in all sensitive application areas where high thermal, electrical and chemical resistance is desired. It is an ideal isophthalic polyester for hot curing systems with its reactive structure. ISO/NPG POLYESTER (511-0392) PACKINKLUX 392 is suitable for the production of quality gelcoats with its excellent hydrolytic stability and resistance to outdoor conditions, abrasion and with its impact resistance. It is recommended to be used as a high performance resin, particularly in the boat industry with its low water absorption and in the production of all kinds of glass-reinforced parts that require both high mechanical values or where chemical resistance is sought (see the table of chemical resistance). PACKINKLUX 392 is an isophthalic, NPG-based, unsaturated polyester with medium reactivity and low viscosity with high mechanical resistance and durability features. It can be used successfully by hand lay-up in ambient conditions and in all kinds of machines and hot applications. Please kindly contact our technical service for special applications and the UV resistant version. TIX, PA GENERAL PURPOSE POLYESTER (511-0496) It is an orthophthalic-based, tix-structured and pre-accelerated polyester with medium reactivity. Wets glass fiber quickly and perfectly. Besides its high physical durability features, it has sufficient resistance against chemicals in line with its intended use. (Please see the tables of chemical resistance) Used in the production of bus, truck, car hoods, in boat, yacht, railway wagon, auto trailer applications and in the production of water and storage tanks of various chemical substances.

Need a specific grade?

Tell us your press, substrate, and volume — we'll point you to the right line.

Contact sales