Product catalog

Products

6 product(s) in Solvents

Solvents

A specialized range of ethanol, acetate, retarder, ethoxy, and IPA solvents for viscosity adjustment, drying control, and efficient ink transfer in flexographic and rotogravure printing.

Printing Thinner A

Solvents

Printing Thinner A is the general solvent for reducing a printing ink and holding its viscosity. When a flexo or gravure ink is too heavy, a controlled addition brings it back to the flow the anilox or cylinder expects, without using a retarder or a fast-dry blend by mistake. PACKINK Thinner A is the everyday reducer. Add it gradually as solvent evaporates during the run, and recheck flow each time. It is for dilution and viscosity control, not for changing the drying speed of an ink that is already transferring well.

Printing Thinner B

Solvents

Printing Thinner B reduces viscosity and is chosen when the ink also needs to dry faster on the substrate. Faster drying helps a high-speed web release cleanly and reduces set-off or blocking in the rewind. Use PACKINK Thinner B on solvent inks when drying, not only thickness, is the limit. It still dilutes the ink, so check color strength and viscosity together. It is the fast-drying grade, not a stand-in for the slower thinners.

Printing Thinner C

Solvents

Printing Thinner C is the slower-drying reducer. It lowers viscosity and gives the ink more time to transfer and level before the solvent leaves the film. That helps when ink is drying in the cells, on the plate, or before it has wet the substrate. PACKINK Thinner C is for solvent inks that look starved or pinholed because they set too quickly. Add it to improve transfer, then confirm the web still dries before rewind or stacking. It is a retarding thinner, not a faster one.

Printing Thinner D

Solvents

Printing Thinner D sits between the fast and slow grades. It dilutes the ink and keeps drying in a middle range, so flow stays smooth without a sharp change in open time. PACKINK Thinner D is the balanced correction for a run that is already close: the ink transfers, but viscosity or flow needs a nudge that should not push drying hard either way. Adjust in small steps and watch both cup viscosity and the print.

Printing Thinner H

Solvents

Printing Thinner H is for fine dilution and viscosity adjustment when a bulk reducer is too coarse a step. Small additions bring a solvent ink back to the flow the anilox, cylinder, or that shift’s conditions need. PACKINK Thinner H does not replace a retarder or a fast dryer. It restores a workable viscosity so color and transfer stay where the printer set them. Measure before and after each addition, especially on a long run where solvent loss keeps thickening the ink.

Printing Thinners

Solvents

Printing thinners are the individual solvents used to dilute ink, set viscosity, and influence how fast a flexo or gravure ink dries. A printer picks from this list instead of a single general thinner when the job needs a particular evaporation rate or a solvent the formula already uses. PACKINK supplies them as named grades for the ink room. Add only the solvent the formula calls for, and recheck viscosity after each addition. The grades in this range are: 2-Ethyl hexanol Benzyl alcohol Diacetone alcohol Ethyl alcohol, natural Ethyl alcohol, synthetic denatured Iso butyl alcohol Iso nonyl alcohol Iso propyl alcohol Methyl alcohol N-Butyl alcohol N-Propanol Pentylol Propaylol Sabutol Methyl iso butyl carbinol

Need a specific grade?

Tell us your press, substrate, and volume — we'll point you to the right line.

Contact sales